24Vin

Features:

DC input range: 18- 36V
DC output: 24V
Programmable output: 10 to 110%
Regulation: ±0.2% no load to full load
Efficiency: 88%
Maximum operating temperature: 100°C at full load
Power density: 60W/cubic inch
Height above board: 0.43 in. (10,9 mm)
Parallelable, with N+M fault tolerance
Low noise ZCS/ZVS architecture



Application

telecommunications process control and distributed power systems


Specifications

Parameter	Rating	Unit	Notes
+In to In voltage	-0.5 to +36	Vdc
+In to In voltage	50	Vdc	<100ms
PC to In voltage	-0.5 to +7.0	Vdc
PR to In voltage	-0.5 to +7.0	Vdc
+Out to Out voltage	-0.5 to +31.7	Vdc
SC to Out voltage	-0.5 to +1.5	Vdc
Isolation voltage (in to out)	2000	Vrms
Isolation voltage (in to base)	1550	Vrms
Isolation voltage (out to base)	500	Vrms
Storage temperature (CGrade)	-40 to +125		See part numbering chart on this page for other product grades.
Operating temperature (CGrade)	-20 to +100		Baseplate
Pin soldering temperature	500 (260)	()	<7 sec;hand solder
Pin soldering temperature	750 (390)	()	<7 sec;hand solder
Mounting torque	5 (0.57)	in-lbs (N-m)	6 each, # 4-40 or M3

Description

     This 24Vin DC-DC converter module uses 2nd Generation power processing, control and packaging technologies to provide the performance, flexibility and cost effectiveness expected of a mature power component. For example, a plated-cavity core transformer couples widely separated primary and secondary windings, resulting in low in-to-out parasitic capacitance and noise. High frequency ZCS/ZVS switching, advanced power semiconductor packaging and thermal management provide high power density with low temperature gradients. Extensive use of silicon integration results in 1/3 the part count of a 1st Generation converter.