Series: -
Voltage - Off State: 800V
Operating Temperature: -40°C ~ 125°C
Mounting Type: Through Hole
SCR Type: Standard Recovery
Manufacturer: Vishay Semiconductors
Current - On State (It (AV)) (Max): 16A
Current - On State (It (RMS)) (Max): 25A
Voltage - Gate Trigger (Vgt) (Max): 2V
Voltage - On State (Vtm) (Max): 1.25V
Current - Gate Trigger (Igt) (Max): 45mA
Current - Hold (Ih) (Max): 100mA
Current - Off State (Max): 500µA
Current - Non Rep. Surge 50, 60Hz (Itsm): 350A @ 50Hz
Packaging: Tube
Package / Case: TO-220-3 Full Pack
Supplier Device Package: TO-220AB Full-Pak
Specifications
| PARAMETER |
SYMBOL |
TEST CONDITIONS |
VALUES |
UNITS |
| TYP. |
MAX |
| Maximum average on-state current |
IT(AV) |
TC = 85 , 180° conduction half sine wave |
16 |
A |
| Maximum RMS on-state current |
IRMS |
|
25 |
Maximum peak, one-cycle,
non-repetitive surge current |
ITSM |
10 ms sine pulse, rated VRRM applied |
300 |
| 10 ms sine pulse, no voltage reapplied |
350 |
| Maximum I2t for fusing |
I2t |
10 ms sine pulse, rated VRRM applied |
450 |
A2s |
| 10 ms sine pulse, no voltage reapplied |
630 |
| Maximum I2t for fusing |
I2t |
t = 0.1 to 10 ms, no voltage reapplied |
6300 |
A2s |
| Maximum on-state voltage drop |
VTM |
16 A, TJ = 25 |
1.25 |
V |
| On-state slope resistance |
rt |
TJ = 125 |
12.0 |
m |
| Threshold voltage |
VT(TO) |
1.0 |
V |
| Maximum reverse and direct leakage current |
IRM/IDM |
TJ = 25 |
VR = Rated VRRM/VDRM |
0.5 |
mA |
| TJ = 125 |
10 |
| Holding current |
IH |
Anode supply = 6 V, resistive load, initial IT = 1 A |
- |
100 |
| Maximum latching current |
IL |
Anode supply = 6 V, resistive load |
200 |
| Maximum rate of rise of off-state voltage |
dV/dt |
|
500 |
V/s |
| Maximum rate of rise of turned-on current |
dI/dt |
|
150 |
A/s |
DescriptionThe 25TTS...FPPbF High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 140 junction temperature.
Typical 25TTS08FPPbF applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS); plastic material 94VRo.
25TTS08FPPbF has been designed and qualified for industrial level and lead (Pb)-free ("PbF" suffix).
Phase Control SCR TO-220AB FULL-PAK, 25 A
25TTS08FPPBF Data Sheet
