30L30CTS/30L30CT-1

The 30L30CTS/30L30CT-1 is a kind of schottky rectifier.Here you can get some information about the features.First,the proprietary barrier technology allows for reliable operation up to 150 junction temperature.Secondly,it adopts center tap configuration.Thirdly,it has very low forward voltage drop.Fourthly,it has high frequency operation.Fifthly,it has high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance.Sixthly,it has guard ring for enhanced ruggedness and long term reliability.Seventhly,it is designed and qualified for Q101 level.Typical applications are in switching power supplies, converters, freewheeling diodes,and reverse battery protection.
You have to understand the major ratings and characteristics if you want to purchase the product.The I_F(AV) is 30 A at rectangular waveform.The V_RRM is 30 V.The V_F is 0.37 V under the condition of 15 Apk, T_J = 125 (per leg).The T_J ranges from - 55 to 150 .
The following is about the voltage ratings of 30L30CTS/30L30CT-1.The V_R (Maximum DC reverse voltage) and the V_RWM (Maximum working peak reverse voltage) are both 30 V.
The last one is about the absolute maximum ratings of 30L30CTS/30L30CT-1.The Maximum average forward current per device (I_F(AV)) is 30 A and the The Maximum average forward current per leg is 15 A under the condition of 50 % duty cycle at T_C = 140 , rectangular waveform.Following any rated load condition and with rated V_RRM applied,The maximum peak one cycle non-repetitive surge current (I_FSM) is 1450 A at 5 s sine or 3 s rect. pulse and 220 A at 10 ms sine or 6 ms rect. pulse.The non-repetitive avalanche energy per leg (E_AS) is 15 mJ at T_J = 25 , I_AS = 2 A, L = 7.5 mH.The repetitive avalanche current per leg (I_AR) is 2 A under the condition of current decaying linearly to zero in 1 s and frequency limited by T_J maximum V_A = 1.5 x VR typical.The maximum junction capacitance per leg (C_T) is 1500 pF under the condition that V_R = 5 VDC (test signal range 100 kHz to 1 MHz) 25 . The typical series inductance per leg (L_S) is 8.0 nH which is measured lead to lead 5 mm from package body.The maximum voltage rate of change (dV/dt) is 10 000 V/s at rated V_R.