30MPA0562

      30MPA0562 is a 28.0-31.0 GHz GaAs MMIC power amplifier.Here you can get some information about its features.It has five features as follows.The first one is that it is  a ka-band 1 W power amplifier.The second one is that it has 27.0 dB small signal gain.The third one is that it has +30.0 dBm saturated output power.The fourth is that it has 100% On-wafer RF, DC and output power testing.The fifth one is that it has 100% visual inspection to MIL-STD-883 Method 2010.
      Then we give you the general situation about 28.0-31.0 GHz GaAs MMIC power amplifier. This MMIC uses Mimix Broadband's 0.15 m GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. The chip has surface passivation to protect and provide a rugged part with backside via holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach process. This device is widely used in  Millimeter-wave Pointto-Point Radio, LMDS, SATCOM and VSAT.Then we have to understand the maximum ratings and characteristics if you want to purchase the product.The supply voltage (Vd) is +6.5VDC.The supply current (Id1,2,3) is 112,170 and 450 mA respectively.The gate bias voltage (Vg) is +0.3 VDC.The input power (Pin) is TBD.The storage temperature (Tstg) is from -65 to +165 .
      The following is about the electrical characteristics (Ambient Temperature T = 25 ).There are ten electrical characteristics as follows.The first one is about the frequency range.The minimum is 28.0GHz and the maximum is 31.0GHz. The second one is the input return loss which is 10.0dB.The third one is the output return loss which is 10.0dB.The fouth one is the small signal gain which is 27.0dB. The fifth one is the gain flatness which is +/-1.0dB.The sixth one is the reverse isolation which is 50.0dB.The seventh one is the saturated output power which is +30.0dBm.The eighth one is drain bias voltage.The typical is +5.0VDC and the maximum is +6.0VDC.The ninth one is gate bias voltage. The minimum is -1.0VDC,the typical is-0.7VDC and the maximum is +0.0VDC.The tenth one is about the supply current.On the condition that Vd=5.0V and Vg=-0.7V typical,the typical of supply current (Id1) is 100mA and the maximum is 112mA;the typical of supply current (Id2) is 150mA and the maximum is 170mA;the typical of supply current (Id3) is 400mA and the maximum is 450mA.
      There is not much information about the product.If you want to get more information,please pay attention to our website,we will update timely.