70F3035AY

Features:

` Number of instructions: 74
` Minimum instruction execution time: 76.9 ns (@ internal 13 MHz operation)
` General-purpose registers: 32 bits * 32 registers
`Instruction set: Signed multiplication, saturation operations, 32-bit shift instructions, bit manipulation
   instructions, load/store instructions
`Memory space: 16 MB linear address space
` Internal memory ROM: 128 KB ( PD703034A, 703034AY: mask ROM)
                                        256 KB ( PD703035A, 703035AY: mask ROM)
                                        256 KB ( PD70F3035A, 70F3035AY: flash memory)
                               RAM: 12 KB ( PD703034A, 703034AY)
                                        16 KB ( PD703035A, 703035AY, 70F3035A, 70F3035AY)
` Interrupt/exception: PD703034A, 703035A, 70F3035A (external: 8, internal: 32 sources, exception: 1 source)
                                     PD703034AY, 703035AY, 70F3035AY (external: 8, internal: 33 sources, exception: 1 source)
`I/O lines Total: 83
` Timer/counters: 16-bit timer (2 channels: TM0, TM1)
                              8-bit timer (6 channels: TM2 to TM7)
` Watch timer: 1 channel
` Watchdog timer: 1 channel
` IEBus controller: 1 channel
` Serial interface
` Asynchronous serial interface (UART0, UART1)
` Clocked serial interface (CSI0 to CSI3)
` 3-wire variable length serial interface (CSI4)
` I<sup>2</sup>C bus interface (I<sup>2</sup>C0, I<sup>2</sup>C1) ( PD703034AY, 703035AY, 70F3035AY only)
` 10-bit resolution A/D converter: 12 channels
` DMA controller: 6 channels
` Real-time output port: 8 bits * 1 channel or 4 bits * 2 channels
` ROM correction: 4 places can be corrected
` Power-saving function: HALT/IDLE/STOP modes
` Packages: 100-pin plastic LQFP (fine pitch) (14 *14)
                     100-pin plastic QFP (14 * 20)
` PD70F3035A, 70F3035AY
` Can be replaced with PD703035A and 703035AY (internal mask ROM) in mass production


Application

· AV equipment (audio, car audio, VCR, TV, etc.)


Pinout




Specifications

Parameter	Symbol	Conditions	Ratings	Unit
Supply voltage	VDD	VDD pin	0.5 to +7.0	V
	AVDD	AVDD pin	0.5 to +7.0	V
	BVDD	BVDD pin	0.5 to +7.0	V
	EVDD	EVDD pin	0.5 to +7.0	V
	AVSS	AVSS pin	0.5 to +0.5	V
	BVSS	BVSS pin	0.5 to +0.5	V
	EVSS	EVSS pin	0.5 to +0.5	V
Input voltage	VI1	Note 1 (BVDD pin)	0.5 to BVDD + 0.5Note 4	V
	VI2	Note 2 (EVDD pin)	0.5 to EVDD + 0.5Note 4	V
	VI3	VPP pin ( PD70F3035A, 70F3035AY only)	0.5 to +8.5	V
Analog input voltage	VIAN	Note 3 (AVDD pin)	0.5 to AVDD + 0.5Note 4	V
Analog reference input voltage	AVREF	AVREF pin	0.5 to AVDD + 0.5Note 4	V
Output current, low	IOL	Per pin	4.0	mA
		Total for P00 to P07, P10 to P15, P20 to P25	25	mA
		Total for P26, P27, P30 to P37, P100 to P107, P110 to P113	25	mA
		Total for P40 to P47, P90 to P96, CLKOUT	25	mA
		Total for P50 to P57, P60 to P65	25	mA
Output current, high	IOH	Per pin	4.0	mA
		Total for P00 to P07, P10 to P15, P20 to P25	25	mA
		Total for P26, P27, P30 to P37, P100 to P107, P110 to P113	25	mA
		Total for P40 to P47, P90 to P96, CLKOUT	25	mA
		Total for P50 to P57, P60 to P65	25	mA
Output voltage	VO1	Note 1 (BVDD pin)	0.5 to BVDD + 0.5Note 4	V
	VO2	Note 2 (EVDD pin)	0.5 to EVDD + 0.5Note 4	V
Operating ambient temperature	TA	Normal operation mode	40 to +85
		Flash memory programming mode ( PD70F3035A, 70F3035AY only)	10 to 85
Storage temperature	Tstg	PD703034A, 703034AY	65 to +150
		PD703035A, 703035AY
		mPD70F3035A, 70F3035AY	40 to +125

Notes 1. Ports 4, 5, 6, 9, CLKOUT, and their alternate-function pins
          2. Ports 0, 1, 2, 3, 10, 11, RESET, and their alternate-function pins
          3. Ports 7, 8, and their alternate-function pins
          4. Be sure not to exceed the absolute maximum ratings (MAX. value) of each supply voltage.


Description

The PD703034A, 703034AY, 703035A, 703035AY, 70F3035A, and 70F3035AY (V850/SB2) are 32-/16-bit single-chip microcontrollers of the V850 Family^TM for AV equipment. 32-bit CPU, ROM, RAM, timer/counters, serial interfaces, A/D converter, DMA controller, and so on are integrated on a single chip.

The PD70F3035A and 70F3035AY have flash memory in place of the internal mask ROM of the PD703035A and 703035AY. Because flash memory allows the program to be written and erased electrically with the device mounted on the board, these products are ideal for the evaluation stages of system development, small-scale production, and rapid development of new products.