74HC4052

Features: • Wide analog input voltage range from −5 V to +5 V• Low ON-resistance: 80 Ω (typical) at VCC − VEE = 4.5 V 70 Ω (typical) at VCC − VEE = 6.0 V 60 Ω (typical) at VCC − VEE = 9.0 V• Logic level translation: to enable 5 V logic to...

product image

74HC4052 Picture
SeekIC No. : 004250769 Detail

74HC4052: Features: • Wide analog input voltage range from −5 V to +5 V• Low ON-resistance: 80 Ω (typical) at VCC − VEE = 4.5 V 70 Ω (typical) at VCC − VEE = 6.0 V 60...

floor Price/Ceiling Price

Part Number:
74HC4052
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Wide analog input voltage range from −5 V to +5 V
• Low ON-resistance:
    80 Ω (typical) at VCC − VEE = 4.5 V
    70 Ω (typical) at VCC − VEE = 6.0 V
    60 Ω (typical) at VCC − VEE = 9.0 V
• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
• Typical "break before make" built in
• Complies with JEDEC standard no. 7A
• ESD protection:
    HBM EIA/JESD22-A114-B exceeds 2000 V
    MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 °C to +85 °C and −40 °C to +125 °C



Application

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating.



Specifications

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCC supply voltage   −0.5 +11.0 V
IIK input diode current VI <−0.5 V or VI > VCC + 0.5 V ±20 mA
ISK switch diode current VS <−0.5 V or VS > VCC + 0.5 V ±20 mA
IS switch current −0.5 V < VS < VCC + 0.5 V ±25 mA
IEE VEE current   ±20 mA
ICC;IGND VCC or GND current   ±20 mA
Tstg storage temperature   −65 +150 °C
Ptot power dissipation Tamb = −40 °C to +125 °C; note 500 mW
PS power dissipation per switch   100 mW



Description

The 74HC4052 and 74HCT4052 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4052B. They are specified in compliance with JEDEC standard no. 7A.

The 74HC4052 and 74HCT4052 are dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW enable input (pin E). When pin E = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin E = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1.

VCC and GND of the 74HC4052 are the supply voltage pins for the digital control inputs (pins S0, S1, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4052 and 4.5 V to 5.5 V for 74HCT4052. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC − VEE may not exceed 10.0 V.

For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Power Supplies - Board Mount
LED Products
Tapes, Adhesives
803
Soldering, Desoldering, Rework Products
Undefined Category
Circuit Protection
View more