DescriptionThe AAT3520IGY-2.63-200-T1 is one member of the AAT3520 family which is designed as the MicroPower Microprocessor reset circuit device that can be used in (1)cell phones; (2)embedded systems; (3)intelligent instruments; (4)notebook computers; (5)portable electronics applications. also i...
AAT3520IGY-2.63-200-T1: DescriptionThe AAT3520IGY-2.63-200-T1 is one member of the AAT3520 family which is designed as the MicroPower Microprocessor reset circuit device that can be used in (1)cell phones; (2)embedded syst...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The AAT3520IGY-2.63-200-T1 is one member of the AAT3520 family which is designed as the MicroPower Microprocessor reset circuit device that can be used in (1)cell phones; (2)embedded systems; (3)intelligent instruments; (4)notebook computers; (5)portable electronics applications. also it is available in a Pb-free, 3-pin SOT23 package and are specified over the -40°C to +85°C operating temperature range.
Features of the AAT3520IGY-2.63-200-T1 are:(1)Input Voltage Range: 1.2V to 5.5V; (2)Operation Down to 1.2V; (3)Extremely Low Quiescent Current: <2 uA; (4)High Accuracy Detection Threshold: +/-1.5%; (5)Monitor Power Supply Voltages; (6)Fixed Thresholds from 2.2V to 4.6V; (7)Reset Pulse Width Options; (8)Minimum 30ms or 150ms; (9)Fast Propagation Delay <20 us; (10)Available Output Configurations:; (11)Open-Drain Output; (12)CMOS Active High Output; (13)CMOS Active Low Output; (14)Temperature Range: -40 to +85 ; (15)3-Pin SOT23 Package; (16)4kV ESD Rating.
The absolute maximum ratings of the AAT3520IGY-2.63-200-T1 can be summarized as:(1)Vcc to GND: -0.3 to 5.5 V;(2)RESET to GND (Push-Pull Output): -0.3 to Vcc + 0.3 V;(3)RESET to GND (Open Drain Output): -0.3 to 5.5 V;(4)Maximum Continuous Input Current: 20 mA;(5)RESET/RESET Current: 20 mA;(6)Rate of Rise of Vcc: 100 V/s;(7)Operating Junction Temperature Range: -40 to 150 °C;(8)Maximum Soldering Temperature (at Leads) for 10 seconds: 300 °C. If you want to know more information about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .