ACPL-782T-000E

Common Mode Rejection Ratio (Min) :
Packaging : Tube
Supply Current : 16 mA
Mounting Style : Through Hole
Input Offset Voltage : 0.3 mV
Bandwidth : 100 kHz
Operating Supply Voltage : 4.5 V to 5.5 V
Operating Temperature Range : - 40 C to + 125 C
Package / Case : DIP-8


Specifications

• Part-to-part gain tolerance of ±2% over temperature allowing high precision applications
• Performance specified for automotive isolation amplifier applications over temperature range: -40°C to 125°C.
  15 kV/μs Common-Mode Rejection at V_CM = 1000V
• Qualified to Automotive AEC-Q100 stress test guidelines that ease the designer designs in harsh operating conditions.
• Good CMR - Prevent erroneous signals and ensure reliable operation under noisy environment
• Safety regulatory approvals (UL1577, IEC/EN/DIN EN 60747-5-5 and CSA Pending) that meets regulatory requirement 

Description

The ACPL-782T automotive isolation amplifier family was designed for current sensing in electronic motor drives and battery system. In a typical implementation, motor currents or battery current flow through an external resistor and the resulting analog voltage drop is sensed by the ACPL-782T. A differential output voltage is created on the other side of the ACPL-782T optical isolation barrier. This differential output voltage of ACPL-782T is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit.

Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the ACPL-782T was designed to ignore very high common-mode transient slew rates (of at least 10 kV/s).

The high CMR capability of the ACPL-782T isolation amplifier provides the precision and stability needed to accurately monitor motor current in high noise motor control environments, providing for smoother control (less "torque ripple") in various types of motor control applications.

The product ACPL-782T can also be used for general analog signal isolation applications requiring high accuracy, stability, and linearity under similarly severe noise conditions. For general applications, we recommend the ACPL-782T (gain tolerance of ±3%). For precision applications Avago Technologies offers the ACPL-782T with part-to-part gain tolerance of ±1%. The ACPL-782T utilizes sigma delta (−) analog-to-digital converter technology, chopper stabilized amplifiers, and a fully differential circuit topology.

Together, these features of ACPL-782T deliver unequaled isolation-mode noise rejection, as well as excellent offset and gain accuracy and stability over time and temperature. This performance is delivered in a compact, auto-insertable, industry standard 8-pin DIP package that meets worldwide regulatory safety standards. (A gull-wing surface mount option #300 is also available).