Purchase AD7008AP20, In-stock AD7008AP20 From SeekIC.
MFG:Analog Devices Inc Category:Integrated Circuits (ICs)
Part Number: AD7008AP20
Category: Integrated Circuits (ICs)
MFG: Analog Devices Inc
Descriptions: IC CMOS DDS MODULATOR 44-PLCC
- Table of contents:
AD7008AP20
-
Suppliers
DataSheet
General Description
AD7008AP20 General Description
IC CMOS DDS MODULATOR 44-PLCC
The AD7008AP20 is designed as one kind of 8-/10-channel, low voltage, low power ADCs device that can be used in wide range of applications such as (1)industrial process control; (2)instrumentation; (3)pressure transducers; (4)portable instrumentation; (5)smart transmitters. This device operates from a 32 kHz crystal with an on-board PLL generating the required internal operating frequency and the signals of this device can be converted directly from a transducer without the need for signal conditioning.
Features of the AD7008AP20 are:(1)8-/10-Channel, High Resolution ADCs;(2)Factory-Calibrated;(3)Single Conversion Cycle Setting;(4)Programmable Gain Front End;(5)Simultaneous 50 Hz and 60 Hz Rejection;(6)Operation Can Be Optimized for Analog Performance (CHOP = 0) or Channel Throughput (CHOP = 1);(7)3-Wire Serial: SPI, QSPI, MICROWIRE, and DSP-Compatible Schmitt Trigger on SCLK;(8)Specified for Single 3 V and 5 V Operation;(9)Power-Down: 30 A (32 kHz Crystal Running).
The absolute maximum ratings of the AD7008AP20 can be summarized as:(1)AVDD to AGND:0.3 V to +7 V;(2)AVDD to DGND:0.3 V to +7 V;(3)DVDD to AGND:0.3 V to +7 V;(4)DVDD to DGND:0.3 V to +7 V;(5)AGND to DGND: -0.05 V to +0.05 V;(6)AVDD to DVDD:5 V to +5 V;(7)Analog Input Voltage to AGND:0.3 V to AVDD +0.3 V;(8)Reference Input Voltage to AGND:0.3 V to AVDD +0.3 V;(9)Total AIN/REFIN Current (Indefinite): 30 mA;(10)Junction Temperature: 150°C. If you want to know more information such as the electrical characteristics about it, please download the datasheet in www.seekic.com or www.chinaicmart.com.
AD7008AP20 Parameters
| Technical/Catalog Information | AD7008AP20 |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AD7008AP20 AD7008AP20 |
AD7008AP20
PDF/DataSheet Download
- Datasheet: AD7008AP20
- File Size: 517485 KB
- Manufacturer: AD [Analog Devices]
- Click here to Download
- ·AD7001
- AD [Analog Devices]
- LC2MOS GSM Baseband I/O Port
- 634418 KB
- ·AD7001AS
- AD [Analog Devices]
- LC2MOS GSM Baseband I/O Port
- 634418 KB
- ·AD7002
- AD [Analog Devices]
- LC2MOS GSM Baseband I/O Port
- 466516 KB
- ·AD7002AS
- AD [Analog Devices]
- LC2MOS GSM Baseband I/O Port
- 466516 KB
- ·AD7008
- AD [Analog Devices]
- CMOS DDS Modulator
- 517485 KB
- ·AD7008/PCB
- AD [Analog Devices]
- CMOS DDS Modulator
- 517485 KB
- ·AD7008JP50
- AD [Analog Devices]
- CMOS DDS Modulator
- 517485 KB
- ·AD7008PCB
- AD [Analog Devices]
- CMOS DDS Modulator
- 517485 KB
AD7008AP20 Relative Products
AD7008
The AD7008 direct digital synthesis chip is a numerically controlled oscillator employing a 32-bit phase accumulator, sine and cosine look-up tables and a 10-bit D/A converter integrated on a single CMOS chip. Modulation capabilities are provided for phase m...
AD7002AS
The AD7002AS is designed as one kind of complete low power, two-channel, input / output port that can be used in GSM and PCN applications. Features of this device are:(1)3 auxiliary D/A converters; (2)power-down modes; (3)on-chip voltage reference; (4)low po...
AD7002
The AD7002 is a complete low power, two-channel, input/ output port with signal conditioning. The device is used as a baseband digitization subsystem, performing signal conversion between the DSP and the IF/RF sections in the Pan-European telephone system (G...
AD6C541
The AD6C541 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. It is designed to replace electro-mechanical relays in general purpose switching applications. The relay AD6C541 consists of an integrated circuit that drives two r...
AD6C332
The AD6C332 is a bi-directional, single-pole, single-throw, normally closed multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay AD6C332 consists of an integrated circuit that...
AD6C312
The AD6C312 is a bi-directional, single-pole, single-throw, normally closed multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay AD6C312 consists of an integrated circuit that...
Hotspot Suppliers Product
QU80C188EC20
Price: 5.4-5.5 USD
80C186EC, 186 Integrated Processor, QFP
AM80C188-20
Price: 1-30 USD
AM80C188-20 Advanced Micro Devices
TN80C188EB-20
Price: 8-20 USD
microprocessor, PLCC, -0.5V to + 6.5V
FMM5049VT
Price: 120-160 USD
MMIC amplifier, +12 V, 41.0dBm, Hermetically Sealed Package, high-gain
IRF9540
Price: 0.62-0.78 USD
HEXFET, TO-220, -23 A, 140 W, 430 mJ, Advanced Process Technology
VUO62-12N07
Price: 23-35 USD
Three Phase Rectifier Bridge, Low forward voltage drop, Isolation voltage 3000 V
SN755867
Price: 1-30 USD
QFP100, Drive IC, 5V to 100V, 20W, Mod Ucom Plasma ASIC, SN755867, Texas Instruments
ATTINY13V-10SSU
Price: 0.5-0.8 USD
1K, 10MHZ, 8SOIC , low-power CMOS, 8-bit, microcontroller, AVR enhanced RISC architecture
TLE2082CP
Price: 1.03-1.11 USD
DIP-8, excalibur high-speed, jfet-input operational amplifier, ±19 V, 160 mA
TLP550
Price: 0.6-0.9 USD
Line Receiver Feedback Control, DIP, 2500 Vrms Isolation voltage, TTL compatible, 25 mA Forward cu...
GD82551IT
Price: 4-5 USD
BGA, -0.5 V to 5.0 V, controller
TIL311
Price: 0.5-7 USD
hexadecimal display, 14-pin package
