Pinout
Specifications
| Switch Type |
SPDT |
| # Channels |
2 |
| Ron (Ohms) |
2.5Ohms |
| Id, Is (ON) |
50nA |
| Bandwidth |
145MHz |
| t ON |
13ns |
| t OFF |
3ns |
| Supply Voltage |
Single (+2.7V to +5.5V) |
DescriptionThe ADG787 has the following features including (1)USB 1.1 signal switching compliant;(2)tiny 10-lead LFCSP and MSOP packages, 10-ball WLCSP package;(3)single-supply 1.8 V to 5.5 V operation;(4)typical power consumption: <0.1 W.
The ADG787 is a low voltage, CMOS device that contains two independently selectable single-pole, double-throw (SPDT) switches. It is designed as a general analog-to-digital switch and can also be used for routing USB 1.1 signals.This device offers low on resistance of typically 2.5 , making the part an attractive solution for applications that require low distortion through the switch.The ADG787 comes in a 10-ball WLCSP, a tiny 10-lead LFCSP, and a tiny 10-lead MSOP. These packages make the ADG787 the ideal solution for space-constrained applications.Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG787 exhibits break-before-make switching action.The fall time of a signal is a measure of the time for the signal to fall from 90% of the ON level to 10% of the ON level. Fall time delay is the difference between the fall time, measured at the input, and the fall time, measured at the output.Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time.
Information of ADG787 furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
The ADG787 is a low voltage, CMOS device that contains two independently selectable, single-pole, double-throw (SPDT) switches. It is designed as a general analog/digital switch and can also be
ADG787 Data Sheet
