DescriptionThe ADM1275 is designed as one kind of hot-swap controller and digital power monitor device that can be used in wide range of applications such as (1)Power monitoring and control/power budgeting; (2)Central office equipment; (3)Telecommunication and data communication equipment; (4)PCs/...
ADM1275: DescriptionThe ADM1275 is designed as one kind of hot-swap controller and digital power monitor device that can be used in wide range of applications such as (1)Power monitoring and control/power bu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The ADM1275 is designed as one kind of hot-swap controller and digital power monitor device that can be used in wide range of applications such as (1)Power monitoring and control/power budgeting; (2)Central office equipment; (3)Telecommunication and data communication equipment; (4)PCs/servers. And this device limits the current through the sense resistor by controlling the gate voltage of an external N-channel FET in the power path, via the GATE pin.
Features of the ADM1275 are:(1)Controls supply voltages from 2 V to 20 V; (2)370 ns response time to short circuit; (3)Resistor-programmable 5 mV to 25 mV current limit; (4)±1% accurate, 12-bit ADC for current, VIN/VOUT readback; (5)Charge-pumped gate drive for multiple external N-channel FETs; (6)High gate drive voltage to ensure lowest RDSON; (7)Foldback for tighter FET SOA protection; (8)Automatic retry or latch-off on current fault; (9)Programmable current limit timer for SOA; (10)Programmable, multifunction GPOs; (11)Power-good status output; (12)Analog UV and OV protection; (13)ENABLE pin (ADM1275-3 only); (14)Peak detect registers for current and voltage; (15)PMBus fast mode compliant interface; (16)16-lead QSOP and 20-lead QSOP and LFCSP.
The absolute maximum ratings of the ADM1275 can be summarized as:(1)Junction Temperature: 150°C;(2)Lead Temperature, Soldering (10 sec): 300°C;(3)Operating Temperature Range: -40°C to +85°C;(4)Storage Temperature Range: -65°C to +125°C;(5)Continuous Current into Any Pin: ±10 mA;(6)VSENSE (VSENSE+ to VSENSE-): ±0.3 V;(7)SENSE- Pin: -0.3 V to +25 V;(8)SENSE+ Pin: -0.3 V to +25 V;(9)GATE Pin (Internal Supply Only): -0.3 V to +36 V. If you want to know more information about the ADM1275, please download the datasheet in www.seekic.com or www.chinaicmart.com .