Purchase ADM4210, In-stock ADM4210 From SeekIC.
MFG:ADI D/C:09
Part Number: ADM4210
MFG: ADI
D/C: 09
Description: The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and ins...
- Table of contents:
ADM4210
-
Suppliers
DataSheet
General Description
ADM4210 General Description
The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is used to enhance the gate of the N-channel FET. When an overcurrent condition is detected, the gate voltage of the FET is reduced to limit the current flowing through the sense resistor. During an overcurrent condition, the TIMER cap determines the amount of time the FET remains at a current limiting mode of operation until it is shut down. The ON (ON-CLR) pin is the enable input for the device and can be used to monitor the input supply voltage. The ADM4210 operates with a supply voltage ranging from 2.7 V to 16.5 V.
The ADM4210 is available in two options: the ADM4210-1 with automatic retry for overcurrent fault and the ADM4210-2 with latch off for an overcurrent fault. Toggling the ON (ON-CLR) pin resets a latched fault. The ADM4210 is packaged in a 6-lead TSOT.
ADM4210 Maximum Ratings
| Parameter | Rating |
| VCC Pin | −0.3 V to +20 V |
| SENSE Pin | −0.3 V to +20 V |
| VCC − SENSE | ±5 V |
| TIMER Pin | −0.3 V to (VCC + 0.3 V) |
| ON (ON-CLR) Pin | −0.3 V to +20 V |
| GATE Pin | −0.3 V to (VCC + 11 V) |
| Storage Temperature Range | −65°C to +125°C |
| Operating Temperature Range | −40°C to +85°C |
| Lead Temperature (10 sec) | 300°C |
| Junction Temperature | 150°C |
ADM4210 Features
·Controls supply rails from 2.7 V to 16.5 V
·Allows protected board removal and insertion to a live backplane
·External sense resistor provides adjustable analog current limit with circuit breaker
·Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch
·Automatic retry or latch-off during current fault
·Undervoltage lockout
·Low profile (1 mm), 6-lead, TSOT package
·Pin compatible with LTC4210-1 and LTC4210-2
·Allows protected board removal and insertion to a live backplane
·External sense resistor provides adjustable analog current limit with circuit breaker
·Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch
·Automatic retry or latch-off during current fault
·Undervoltage lockout
·Low profile (1 mm), 6-lead, TSOT package
·Pin compatible with LTC4210-1 and LTC4210-2
ADM4210 Typical Application
·Hot swap board insertion: line cards, raid systems
·Industrial high-side switches/circuit breakers
·Electronic circuit breakers
·Industrial high-side switches/circuit breakers
·Electronic circuit breakers
ADM4210 Connection Diagram
ADM4210
PDF/DataSheet Download
- Datasheet: ADM4210
- File Size: 308067 KB
- Manufacturer:
- Click here to Download
- ·ADM1014
- AD [Analog Devices]
- Dual PCI Hot-PlugTM Controller
- 171739 KB
- ·ADM1014JRU
- AD [Analog Devices]
- Dual PCI Hot-PlugTM Controller
- 171739 KB
- ·ADM101E
- AD [Analog Devices]
- Craft PortTM Tiny RS-232 Transceiver for Portable Applications
- 66054 KB
- ·ADM101EARM
- AD [Analog Devices]
- Craft PortTM Tiny RS-232 Transceiver for Portable Applications
- 66054 KB
- ·ADM1020
- AD [Analog Devices]
- 8-Lead, Low-Cost, System Temperature Monitor
- 135461 KB
- ·ADM1020AR-REEL
- AD [Analog Devices]
- 8-Lead, Low-Cost, System Temperature Monitor
- 135461 KB
- ·ADM1020AR-REEL7
- AD [Analog Devices]
- 8-Lead, Low-Cost, System Temperature Monitor
- 135461 KB
- ·ADM1021
- AD [Analog Devices]
- Low Cost Microprocessor System Temperature Monitor
- 143146 KB
ADM4210 Relative Products
ADM4073WFWRJZ-RL7
IC AMP CURR SENSE 50V/V SOT23-6
ADM4073TWRJZ-REEL7
IC AMP CURR SENSE 20V/V SOT23-6
ADM4073HWRJZ-REEL7
IC AMP CURR SENSE 100V/V SOT23-6
-
ADM4073FWRJZ-REEL7
IC AMP CURR SENSE 50V/V SOT23-6
ADM4073
The ADM4073 is a low cost, high-side, current-sense amplifier ideal for small portable applications such as cell phones, notebook computers, PDAs, and other systems where current monitoring is required. The ADM4073 is available in three different gain models...
ADM3493ARZ-REEL7
IC TXRX RS-422/485 3.3V 8-SOIC
Hotspot Suppliers Product
XC2C512-10FTG256C
Price: 7.5-10 USD
CPLD, BGA, -0.5 to 2.0V
GM76C256CLLFW70
Price: 0.3-0.5 USD
32K x8 bit 5.0V Low Power CMOS slow SRAM
LM1246AAC
Price: 0.1-1 USD
CMOS CRT preamp, DIP, I2C compatible interface
TS431ILT
Price: 0.1-0.2 USD
programmable shunt voltage reference, SOT23-5, 10 V, low-voltage, three-terminal, -20 to +40 mA
1AB11606ADAA
Price: 8.5-10.5 USD
QFP, 1AB11606ADAA, Alcatel-Lucent Enterprise
TPS76201DBVR
Price: 0.1-0.5 USD
voltage regulator, SOT23-5, –0.3 V to 13.5 V, Low-Dropout, Over Current Limitation
EP1K100FI256-2
Price: 15-20 USD
Programmable Logic Device, BGA, –0.5 to 3.6 V, –25 to 25 mA, Dual-port capability
TPSD336K025R0100
Price: 0.15-0.2 USD
Surface Mount, 33UF, 25V, 10%, SMD, tantalum capacitor
TLC272CDR
Price: 0.1-1 USD
dual operational amplifier, SOP, ±5mA
ETN35-030
Price: 1-1 USD
power transistor module, 400V, high current, high DC current gain, 500A, 1500W
TMS320F2811PBKA
Price: 15-30 USD
Digital Signal Processor, On-Chip Memory, High-Performance 32-Bit CPU, External Interface
2DI150Z-120
Price: 1-1 USD
POWER TRANSISTOR MODULE, insulated type
