APJKA4008RWC

Features:

·􀁺4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS.
·􀁺LOW POWER CONSUMPTION.
·􀁺 WIDE VIEWING ANGLE.
·􀁺IDEAL FOR BACKLIGHT AND INDICATOR.
·􀁺VARIOUS COLORS AND LENS TYPES AVAILABLE.
·􀁺PACKAGE : 2000PCS / REEL.
·􀁺MOISTURE SENSITIVITY LEVEL : LEVEL 4.
·􀁺ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
·􀁺TYP. COLOR TEMPERATURE:6500K
·􀁺COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE).
·􀁺OPTICAL EFFICIENCY:10.5 lm/W(TYP.)
·􀁺COLOR REPRODUCTION INDEX:80
·􀁺RoHS COMPLIANT.


Application

·􀁺 traffic signaling.
·􀁺 backlighting (illuminated advertising , general lighting).
·􀁺 interior and exterior automotive lighting.
·􀁺 substitution of micro incandescent lamps.
·􀁺 reading lamps.
·􀁺 signal and symbol luminaire for orientation.
·􀁺 marker lights (e.g. steps, exit ways, etc).
·􀁺 decorative and entertainment lighting.
·􀁺 indoor and outdoor commercial and residential architectural lighting.


Specifications

Parameter	Symbol	Value	Unit
Power dissipation	Pt	114	mW
Reverse Voltage	VR	5	V
Junction temperature	TJ	110	°C
Operating Temperature	Top	-40 To +85	°C
Storage Temperature	Tstg	-40 To +100	°C
DC Forward Current	IF	30	mA
Peak Forward Current Note4	IFM	100	mA
Thermal resistance Junction/ambient Note5 Junction/solder point	Rth JA Rth JS	400 160	°C/W °C/W

Notes:
1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm² per pad),

Description

The source color devices are made with InGaN on SiC Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs.

All devices, equipment and machinery must be electrically grounded.