AT24C04BN-SH-T

The AT24C04BN-SH-T offers 4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 512 words of 8 bits each. The advantage of the device is using in many industrial and commercial appl ications where low-power and low-voltage operation are vital. The AT24C04BN-SH-T is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra-Thin Mini-MAP (MLP 2x3), 5-lead SOT23, 8-lead TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire serial interface. What's more, the AT24C04BN-SH-T  is available in 1.8V (1.8V to 5.5V) version.

The AT24C04BN-SH-T has the following features:(1)low-voltage and standard-voltage operation 1.8 (VCC = 1.8V to 5.5V);(2)internally organized 512 x 8 (4K), or 1024 x 8 (8K);(3)two-wire serial interface;(4)schmitt trigger, filtered inputs for noise suppression;(5)bidirectional data transfer protocol;(6)write protect pin for hardware data protectio n;(7)16-byte page (4K, 8K) write modes;(8)partial page writes allowed.etc.

It also has some maximum ratings and DC characteristics of AT24C04BN-SH-T(TAI = 40°C to +85°C, VCC = +1.8V to +5.5V). maximum ratings:(1):operating temperature ranges from55°C to +125°C;(2):storage temperature ranges from65°C to +150°C;(3):voltage on any pin:with respect to ground is1.0V to +7.0V;(4):maximum operating voltage is 6.25V;(5):DC output current is 5.0 mA.DC characteristics:(1)supply voltage(VCC1) is 1.8 V min and 5.5 V max;(2):supply voltage(VCC2) is 2.5 V min and 5.5 V max;(3)supply voltage(VCC3) is 2.7 V min and 5.5 V max;(4):supply current is 0.4 mA typ and 1.0 mA max when VCC is 5.0V and READ at 100 kHz;supply current is 2.0 mA typ and 3.0 mA max when VCC is 5.0V and WRITE at 100 kHz;(5): standby current is 0.6 uA typ and 3.0 uA max when VCC is 1.8V and VIN is VCC or VSS;(6):input low level is 0.6 V min and VCC x 0.3 V max;(7)output low level(VOL1) is 0.2 V max when VCC is 1.8V and IOL is 0.15 mA.