AT89C2051-24PU

Operating Temperature Range :
Data Bus Width : 8 bit
Core : 8051
Processor Series : AT89x
Mounting Style : Through Hole
Data RAM Size : 128 B
On-Chip ADC : No
Program Memory Size : 2 KB
Maximum Clock Frequency : 24 MHz
Operating Supply Voltage : 2.7 V to 6 V
Package / Case : PDIP


Pinout




Description

The AT89C2051-24PU is one member of the AT89C2051 series.It has the following features including (1)2K bytes of reprogrammable flash memoryendurance: 1,000 write/erase cycles;(2)programmable serial UART channel;(3)low-power idle and power-down modes;(4)green (Pb/Halide-free) packaging option.

The AT89C2051-24PU is a low-voltage, high-performance CMOS 8-bit microcomputer with 2K bytes of Flash programmable and erasable read-only memory (PEROM). The device is manufactured using Atmel's high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a powerful microcomputer which provides a highly-flexible and cost-effective solution to many embedded control applications.The AT89C2051 provides the following standard features: 2K bytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator and clock circuitry. In addition, the AT89C2051 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The power-down mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset.

The AT89C2051-24PU and is an economical and cost-effective member of Atmel's growing family of microcontrollers. It contains 2K bytes of Flash program memory. It is fully compatible with the MCS-51 architecture, and can be programmed using the MCS-51 instruction set. However,there are a few considerations one must keep in mind when utilizing certain instructions to program this device.All the instructions related to jumping or branching should be restricted such that the destination address falls within the physical program memory space of the device, which is 2K for the AT89C2051. This should be the responsibility of the software programmer. For example, LJMP 7E0H would be a valid instruction for the AT89C2051 (with 2K of memory), whereas LJMP 900H would not.

Parameters:

Technical/Catalog Information	AT89C2051-24PU
Vendor	Atmel
Category	Integrated Circuits (ICs)
Program Memory Size	2K x 8
RAM Size	128 x 8
Number of I /O	15
Package / Case	20-DIP
Speed	24MHz
Controller Series	89C
Oscillator Type	Internal
Packaging	Tube
Program Memory Type	FLASH
EEPROM Size	-
Core Processor	8051
Data Converters	-
Core Size	8-Bit
Operating Temperature	-40°C ~ 85°C
Connectivity	UART/USART
Peripherals	LED
Voltage - Supply (Vcc/Vdd)	4 V ~ 6 V
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	AT89C2051 24PU AT89C205124PU