ATTINY13A-PU

Operating Supply Voltage :
Operating Temperature Range :
Data Bus Width : 8 bit
On-Chip ADC : Yes
Maximum Clock Frequency : 20 MHz
Core : AVR
Mounting Style : Through Hole
Data RAM Size : 64 B
Package / Case : PDIP-8
Program Memory Size : 1 KB
Processor Series : ATTINY1x


Description

The ATTINY13A-PU belongs to ATtiny13A family which is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny13A achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The ATtiny13A AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, and Evaluation kits. The device is manufactured using Atmel's high density non-volatile memory technology. The On-chip ISP Flash allows the Program memory to be re-programmed In-System through an SPI serial interface, by a conventional non-volatile memory programmer or by an On-chip boot code running on the AVR core.

The features of ATTINY13A-PU can be summarized as (1)high performance, low power AVR 8-Bit microcontroller; (2)advanced RISC architecture 120 powerful instructions most single clock cycle execution 32 x 8 general purpose working registers fully static operation up to 20 MIPS througput at 20 MHz; (3)high endurance non-volatile memory segments 1K bytes of in-system self-programmable flash program memory 64 Bytes EEPROM 64 Bytes internal SRAM write/erase cycles: 10,000 Flash/100,000 EEPROM data retention: 20 Years at 85°C/100 Years at 25°C (see page 6) programming lock for self-programming flash & EEPROM data security; (4)peripheral features one 8-bit timer/counter with prescaler and two PWM channels 4-channel, 10-bit ADC with internal voltage reference programmable watchdog timer with separate on-chip oscillator on-chip analog comparator; (5)special microcontroller features debugWIRE on-chip debug system in-system programmable via SPI Port external and internal interrupt sources low power idle, ADC noise reduction, and power-down modes enhanced power-on reset circuit programmable brown-out detection circuit with software disable function internal calibrated oscillator; (6)I/O and packages 8-pin PDIP/SOIC: six programmable I/O Lines 20-pad MLF: six programmable I/O Lines; (7)operating voltage: 1.8 - 5.5V; (8)speed grade: 0 - 4 MHz @ 1.8 - 5.5V 0 - 10 MHz @ 2.7 - 5.5V 0 - 20 MHz @ 4.5 - 5.5V industrial temperature range; (9)low power consumption active mode: 190 A at 1.8 V and 1 MHz idle mode: 24 A at 1.8 V and 1 MHz.

This documentation contains simple code examples that briefly show how to use various parts of the device and these code examples assume that the part specific header file is included before compilation. Be aware that not all C compiler vendors include bit definitions in the header files and interrupt handling in C is compiler dependent. Please confirm with the C compiler documentation for more details.

Parameters:

Technical/Catalog Information	ATTINY13A-PU
Vendor	Atmel
Category	Integrated Circuits (ICs)
Program Memory Size	1K x 8
RAM Size	64 x 8
Number of I /O	6
Package / Case	8-DIP
Speed	20MHz
Controller Series	ATtiny
Oscillator Type	Internal
Packaging	Tube
Program Memory Type	FLASH
EEPROM Size	64 x 8
Core Processor	AVR
Data Converters	A/D 4x10b
Core Size	8-Bit
Operating Temperature	-40°C ~ 85°C
Connectivity	-
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
Voltage - Supply (Vcc/Vdd)	1.8 V ~ 5.5 V
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ATTINY13A PU ATTINY13APU