Am70PDL127BD

Storage Temperature
Plastic Packages . . . . . . . . . . .  55°C to +125°C
Ambient Temperature
with Power Applied. . . . . . . . . . .40°C to +85°C
Voltage with Respect to Ground
V_CCf, V_CCs (Note 1) . . . . . . . . . . .0.5 V to +4.0 V
RESET# (Note 2) . . . . . . . . . . . .0.5 V to +12.5 V
WP#/ACC . . . . . . . . . . . . . . . . .0.5 V to +10.5 V
All other pins (Note 1) . . . . .0.5 V to V_CC +0.5 V
Output Short Circuit Current (Note 3) . . . .200 mA

Notes:
1. Minimum DC voltage on input or I/O pins is 0.5 V.During voltage transitions, input or I/O pins may overshoot V_SS to 2.0 V for periods of up to 20 ns.Maximum DC voltage on input or I/O pins is V_CC +0.5 V.See Figure 8. During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns. See Figure 9.
2. Minimum DC input voltage on pins RESET#, and WP#/ACC is 0.5 V. Dur ing vol tage transitions,WP#/ACC, and RESET# may overshoot VSS to 2.0 V for periods of up to 20 ns. See Figure 8. Maximum DC input voltage on pin RESET# is +12.5 V which may overshoot to +14.0 V for periods up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may overshoot to +12.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.

Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.