C8051F022

Operating Temperature Range :
Data Bus Width : 8 bit
On-Chip ADC : Yes
Mounting Style : SMD/SMT
Core : 8051
Program Memory Size : 64 KB
Package / Case : TQFP-100
Processor Series : C8051
Maximum Clock Frequency : 25 MHz
Operating Supply Voltage : 2.7 V to 3.6 V
Data RAM Size : 4.25 KB


Features:

ANALOG PERIPHERALS
-  10-bit ADC
*±1LSB INL
*Programmable Throughput up to 100ksps
*8 External Inputs; Programmable as Single-Ended or
Differential
*Programmable Amplifier Gain:  16, 8, 4, 2, 1, 0.5
*Data Dependent Windowed Interrupt Generator
*Built-in Temperature Sensor (± 3°C)
-  8-bit ADC
*Programmable Throughput up to 500ksps
*8 External Inputs
*Programmable Amplifier Gain:  4, 2, 1, 0.5
-  Two 12-bit DACs
*Can Synchronize Outputs to Timers for Jitter-Free Waveform
Generation
-  Two Comparators
-  Internal Voltage Reference
-  Precision VDD Monitor/Brown-out Detector
ON-CHIP JTAG DEBUG & BOUNDRY SCAN
-  On-Chip Debug Circuitry Facilitates Full Speed, Non-Intrusive In-System Debug (No Emulator Required!)
-  Provides Breakpoints, Single Stepping, Watchpoints, Stack Monitor
-  Inspect/Modify Memory and Registers
-  Superior Performance to Emulation Systems Using ICE-Chips,Target Pods, and Sockets
-  IEEE1149.1 Compliant Boundary Scan
-  Low Cost, Complete Development Kit:  $129
HIGH SPEED 8051 C CORE
-  Pipe-lined Instruction Architecture; Executes 70% of Instructions in 1 or 2 System Clocks
-  Up to 25MIPS Throughput with 25MHz System Clock
-  22 Vectored Interrupt Sources
MEMORY
-  4352 Bytes Internal Data RAM (256 + 4k)
-  64k Bytes In-System Programmable FLASH Program Memory
-  External Parallel Data Memory Interface up to 5Mbytes/sec
DIGITAL PERIPHERALS
-  64 Port I/O; All are 5V tolerant
-  Hardware SMBus^TM  (I2C^TM  Compatible), SPI^TM , and Two UART Serial
Ports Available Concurrently
-  Programmable 16-bit Counter/Timer Array with 5 Capture/Compare Modules
-  5 General Purpose 16-bit Counter/Timers
-  Dedicated Watch-Dog Timer; Bi-directional Reset
CLOCK SOURCES
-  Internal Programmable Oscillator: 2-to-16MHz -  External Oscillator: Crystal, RC, C, or Clock
-  Real-Time Clock Mode using Timer 3 or PCA
SUPPLY VOLTAGE ........................2.7V to 3.6V
-  Typical Operating Current: 10mA @ 25MHz
-  Multiple Power Saving Sleep and Shutdown Modes
100-Pin TQFP (64-Pin Version Available)
Temperature Range: 40°C to +85°C

Specifications

PARAMETER	CONDITIONS	MIN	TYP	MAX	UNITS
GLOBAL CHARACTERISTICS
Digital Supply Voltage		2.7		3.6	V
Digital Supply Current with CPU active	Clock=25MHz		10		mA
	Clock=1MHz		0.8		mA
	Clock=32kHz		20		µA
Digital Supply Current (shutdown)	Oscillator not running; VDD Monitor Enabled Oscillator not running; VDD Monitor Disabled		10 0.1		µA
Digital Supply RAM Data Retention Voltage			1.5		V

Parameters:

Technical/Catalog Information	C8051F022
Vendor	Silicon Laboratories Inc
Category	Integrated Circuits (ICs)
Program Memory Size	64KB (64K x 8)
RAM Size	4.25K x 8
Number of I /O	64
Package / Case	100-TQFP
Speed	25MHz
Controller Series	C8051F02x Flash
Oscillator Type	Internal
Packaging	Tray
Program Memory Type	FLASH
EEPROM Size	-
Core Processor	8051
Data Converters	A/D 8x8b, 8x10b; D/A 2x12b
Core Size	8-Bit
Operating Temperature	-40°C ~ 85°C
Connectivity	EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Voltage - Supply (Vcc/Vdd)	2.7 V ~ 3.6 V
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	C8051F022 C8051F022