Features: • Transmission or Multiplexing of Analog or Digital Signals
• High Voltage Type (20V Rating)
• 20V Digital or ±10V Peak-to-Peak Switching
• 280 Typical On-State Resistance for 15V Operation
• Switch On-State Resistance Matched to Within 10 Typ. Over 15V Signal Input Range
• High On/Off Output Voltage Ratio: 65dB Typ. at FIS = 10kHz, RL = 10k
• High Degree of Linearity: <0.5% Distortion Typ. at FIS = 1kHz, VIS = 5Vp-p, VDD-VSS 10V, RL = 10k
• Extremely Low Off State Switch Leakage Resulting in Very Low Offset Current and High Effective Off State Resistance: 100pA Typ. at VDD-VSS = 18V, TA = 25oC
• Extremely High Control Input Impedance (Control circuit Isolated from Signal Circuit: 1012 Typ.
• Low Crosstalk Between Switches: -50dB Typ. at FIS = 0.9MHz, RL = 1k
• Matched Control Input to Signal Output Capacitance: Reduces Output Signal Transients
• Frequency Response, Switch On = 40MHz (Typ.)
• 100% Tested for Quiescent Current at 20V
• Maximum Control Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V at +25oC
• 5V, 10V and 15V Parametric Ratings
Application• Analog Signal Switching/Multiplexing
• Signal Gating
• Squelch Control
• Chopper
• Modulator
• Demodulator
• Commutating Switch
• Digital Signal Switching/Multiplexing
• CMOS Logic Implementation
• Analog to Digital & Digital to Analog Conversion
• Digital Control of Frequency, Impedance, Phase, and Analog Signal Gain
Pinout
SpecificationsDC Supply Voltage Range, (VDD)..0.5V to +20V (Voltage Referenced to VSS Terminals)
Input Voltage Range, All Inputs .....................................................-0.5V to VDD +0.5V
DC Input Current, Any One Input.......................................................................±10mA
Operating Temperature Range ................. -55 to +125 Package Types D, F, K, H
Storage Temperature Range (TSTG).................................................. -65 to +150
Lead Temperature (During Soldering) ............................................................. +265
At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for 10s MaximumDescriptionCD4016BMS Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.
The CD4016BMS is supplied in these 14 lead outline packages:
Braze Seal DIP H4Q
Frit Seal DIP H1B
Ceramic Flatpack H3W
CD4016BMS Data Sheet
