CD4052BM

Supply Current :
Maximum Power Dissipation :
Number of Channels : 2 Channel
Supply Voltage - Min : 3 V
On Resistance (Max) : 1050 Ohms
Supply Voltage - Max : 20 V
Maximum Operating Temperature : + 125 C
Minimum Operating Temperature : - 55 C
Package / Case : SOIC-16
Packaging : Tube
Propagation Delay Time : 60 ns
On Time (Max) : 720 ns
Off Time (Max) : 450 ns


Features:

• Logic Level Conversion
• High-Voltage Types (20V Rating)
• CD4051BMS Signal 8-Channel
• CD4052BMS Differential 4-Channel
• CD4053BMS Triple 2-Channel
• Wide Range of Digital and Analog Signal Levels:
      Digital 3V to 20V
      Analog to 20Vp-p
• Low ON Resistance: 125 (typ) Over 15Vp-p Signal Input Range for VDD - VEE = 15V
• High OFF Resistance: Channel Leakage of ±100pA (typ) at VDD - VEE = 18V
• Logic Level Conversion:
      Digital Addressing Signals of 3V to 20V (VDD - VSS = 3V to 20V)
      Switch Analog Signals to 20Vp-p (VDD - VEE = 20V); See Introductory Text
• Matched Switch Characteristics: RON = 5 (typ) for VDD - VEE = 15V
• Very Low Quiescent Power Dissipation Under All Digital Control Input and Supply Conditions: 0.2W (typ) at VDD - VSS = VDD - VEE = 10V
• Binary Address Decoding on Chip
• 5V, 10V and 15V Parametric Ratings
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25
• Break-Before-Making Switching Eliminates Channel Overlap

Application

• Analog and Digital Multiplexing and Demultiplexing
• A/D and D/A Conversion
• Signal Gating


Pinout




Specifications

DC Supply Voltage Range, (VDD)..0.5V to +20V (Voltage Referenced to VSS Terminals)
Input Voltage Range, All Inputs .....................................................-0.5V to VDD +0.5V
DC Input Current, Any One Input.......................................................................±10mA
Operating Temperature Range ................. -55 to +125 Package Types D, F, K, H
Storage Temperature Range (TSTG).................................................. -65 to +150
Lead Temperature (During Soldering) ............................................................. +265
At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for 10s Maximum


Description

CD4051BMS, CD4052BMS and CD4053BMS analog multiplexers/ demultiplexers are digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-topeak can be achieved by digital signal amplitudes of 4.5V to 20V (if VDD-VSS = 3V, a VDD-VEE of up to 13V can be controlled; for VDD-VEE level differences above 13V, a VDDVSS of at least 4.5V is required). For example, if VDD = +4.5V, VSS = 0, and VEE = -13.5V, analog signals from - 13.5V to +4.5V can be controlled by digital inputs of 0 to 5V.

These CD4052BM multiplexer circuits dissipate extremely low quiescent power over the full VDD-VSS and VDD-VEE supply voltage ranges, independent of the logic state of the control signals. When a logic "1" is present at the inhibit input terminal all channels are off.

The CD4051BMS is a single 8 channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.

The CD4052BMS is a differential 4 channel multiplexer having two binary control inputs, A and B, and an inhibit input. The two binary input signals select 1 of 4 pairs of channels to be turned on and connect the analog inputs to the outputs.

The CD4053BMS is a triple 2 channel multiplexer having three separate digital control inputs, A, B, and C, and an inhibit input. Each control input selects one of a pair of channels which are connected in a single pole double-throw configuration.

The CD4051BMS, CD4052BMS and CD4053BMS are supplied in these 16 lead outline packages:
   Braze Seal DIP            *H4X     †H4T
   Frit Seal DIP                H1E
   Ceramic Flatpack         H6W
   *CD4051B Only          †CD4052B, CD4053 Only

Parameters:

Technical/Catalog Information	CD4052BM
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Type	Multiplexer/Demultiplexer
Voltage Supply Source	Dual Supply
Voltage - Supply, Single/Dual (±)	±3 V ~ 20 V
Circuit	2 x 4:1
On-State Resistance	240 Ohm
Mounting Type	Surface Mount
Package / Case	16-SOIC (3.9mm Width)
Packaging	Tube
Current - Supply	.08A
Operating Temperature	-55°C ~ 125°C
Function	Multiplexer/Demultiplexer
Drawing Number	296; 4040047-4; D; 16
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	CD4052BM CD4052BM