Maximum Operating Temperature
: + 125 C
Packaging
: Reel
Supply Voltage - Min
: 2 V
Low Level Output Current
: 32 mA
Supply Voltage - Max
: 6 V
Minimum Operating Temperature
: - 55 C
Logic Family
: 74HC
Logic Type
: Transparent Latch
Number of Circuits
: 2
Polarity
: Inverting/Non-Inverting
Number of Output Lines
: 4
High Level Output Current
: - 5.2 mA
Propagation Delay Time
: 130 ns at 2 V, 26 ns at 4.5 V, 22 ns at 6 V
Package / Case
: SOP-16
Pinout
DescriptionThe CD74HC75NSRE4 is dual 2-bit bistable transparent latches.Each one of the 2-bit latches is controlled by separate enable inputs which are active LOW.When the enable input is high data enters the latch and appears at the Q output.
Features of the CD74HC75NSRE4 are:(1)true and complementary outputs;(2)buffered inputs and outputs;(3)fanout(over temperature range) stabdard outputs is 10 LSTTL loads,bus driver outputs is 15 LSTTL loads;(4)wide operating temperature range is -55 to 125;(5)CD74HC75NSRE4 balanced propagation delay and transition times;(6)significant power reduction compared to LSTTL logic ICs;(7)HC types is 2V to 6V operation,high noise immunity:NIL=30%,NIH=30% of VCC at VCC=5V;(8)HCT types is 4.5V to 5.5V operation,direct LSTTL input logic compatibility,VIL=0.8V(Max),VIH=2V(Min),CMOS input compatibity,II1A at VOL,VOH.
The absolute maximum ratings of the CD74HC75NSRE4 can be summarized as:(1):the parameter is DC supply voltage,the symbol is VCC,the rating is -0.5 to 7,the unit is V;(2):the parameter is DC input diode current,the symbol is IIK,the rating is ±20,the unit is mA;(3):the parameter is DC drain current,per output,the symbol is IO,the rating is ±25,the unit is mA;(4):the parameter is DC output diode current,the symbol is IOK,the rating is ±20,the unit is mA;(5):the parameter is DC output source or sink current per output pin,the symbol is IO,the rating is ±25,the unit is mA;(6):CD74HC75NSRE4 parameter is DC VCC or ground current,the symbol is ICC,the rating is ±50,the unit is mA.
Parameters: | Technical/Catalog Information | CD74HC75NSRE4 |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 2 |
| Circuit | 2:2 |
| Output Type | Differential |
| Current - Output High, Low | 5.2mA, 5.2mA |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOP |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -55°C ~ 125°C |
| Delay Time - Propagation | 10ns |
| Voltage - Supply | 2 V ~ 6 V |
| Drawing Number | 296; 4040062; NS; 14, 16, 20, 24 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | CD74HC75NSRE4
CD74HC75NSRE4
|
CD74HC75NSRE4 Data Sheet
