Features: CAN 2.0B (passive) InterfacePower On Reset (selectable)One 16-bit timer, with two 16-bit registers supporting:- Processor Independent PWM mode- External Event counter mode- Input Capture modeHigh speed, constant resolution 8-bit PWM/frequency monitor timer with 2 output pins2048 bytes on...
COP884BC: Features: CAN 2.0B (passive) InterfacePower On Reset (selectable)One 16-bit timer, with two 16-bit registers supporting:- Processor Independent PWM mode- External Event counter mode- Input Capture m...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Temperature Min | -55 deg C |
| Temperature Max | 125 deg C |
| Code Memory | 2000 Bytes |
| Code Type | ROM |
| RAM Size Bytes | 64 Bytes |
| I/O | 18 |
| Halt/Idle | Yes |
| Wakeup | Yes |
| TO Timer | Yes |
| Supply Min | 2.5 Volt |
| Supply Max | 6 Volt |
| Interrupts | 12 |
| Power on Reset | Yes |
| Interface Type | Microwire |
| USART Interface | No |
| CAN | Yes |
| With Comparators | 2 |
| With TempSensor | No |
| View Using Catalog | |
The COP884BC ROM based microcontrollers are highly integrated COP8™ Feature core devices with 2k memory and advanced features including a CAN 2.0B (passive) interface and two Analog comparators. These single-chip CMOS devices are suited for applications requiring a full featured controller with a CAN interface, low EMI, and an 8-bit 39 kHz PWM timer. COP87L84BC devices are pin and software compatible 16k OTP (One Time Programmable) versions for pre-production, and for use with a range of COP8 software and hardware development tools.
COP884BC Features include an 8-bit memory mapped architecture, 10 MHz CKI (crystal osc) with 1s instruction cycle, one multifunction 16-bit timer/counter, 8-bit 39 kHz PWM timer with 2 outputs, CAN 2.0B (passive) interface, MICROWIRE/ PLUS™ serial I/O, two Analog comparators, two power saving HALT/IDLE modes, idle timer, MIWU, software selectable I/O options, Power on Reset, low EMI 4.5V to 5.5V operation, and 20/28 pin packages.