COP8CDE9

Features:

KEY FEATURES
n 8k bytes Flash Program Memory with Security Feature
n Virtual EEPROM using Flash Program Memory
n 256byte volatile RAM
n 10-bit Successive Approximation Analog to Digital
   Converter (up to 16 channels)
n 100% Precise Analog Emulation
n USART with onchip baud generator
n 2.7V 5.5V In-System Programmability of Flash
n High endurance -100k Read/Write Cycles
n Superior Data Retention - 100 years
n Dual Clock Operation with HALT/IDLE Power Save
   Modes
n Two 16-bit timers:
- Timer T2 can operate at high speed (50 ns resolution)
- Processor Independent PWM mode
- External Event counter mode
- Input Capture mode
n Brown-out Reset (COP8CBE9/CCE9)
n High Current I/Os
- B0 B3: 10 mA @ 0.3V
- All others: 10 mA @ 1.0V
    OTHER FEATURES
n Single supply operation:
- 2.7V5.5V (0˚C to +70˚C)
- 4.5V5.5V (−40˚C to +125˚C)
n Quiet Design (low radiated emissions)
n Multi-Input Wake-up with optional interrupts
n MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
n Clock Doubler for 20 MHz operation from 10 MHz
   Oscillator, with 0.5 µs Instruction Cycle
n Eleven multi-source vectored interrupts servicing:
- External Interrupt
- USART (2)
- Idle Timer T0
- Two Timers (each with 2 interrupts)
- MICROWIRE/PLUS Serial peripheral interface
- Multi-Input Wake-up
- Software Trap
n Idle Timer with programmable interrupt interval
n 8-bit Stack Pointer SP (stack in RAM)
n Two 8-bit Register Indirect Data Memory Pointers
n True bit manipulation
n WATCHDOG and Clock Monitor logic
n Software selectable I/O options
- TRI-STATE Output/High Impedance Input
- Push-Pull Output
- Weak Pull Up Input
n Schmitt trigger inputs on I/O ports
n Temperature range: 0˚C to +70˚C and 40˚C to +125˚C (COP8CCE9/CDE9)
n Packaging: 44 PLCC, 44 LLP and 48 TSSOP

 

Specifications

Supply Voltage (V_CC)                            7V
Voltage at Any Pin                                −0.3V to V_CC +0.3V
Total Current into V_CC Pin (Source)      200 mA
Total Current out of GND Pin (Sink)      200 mA
Storage Temperature Range                −65˚C to +140˚C
ESD Protection Level                            2 kV (Human Body Model)


Description

The COP8CBE9/CCE9/CDE9 Flash microcontrollers are highly integrated COP8™ Feature core devices, with 8k Flash memory and advanced features including Virtual EE- PROM, A/D, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device COP8CDE9 is suited for applica- tions requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume produc- tion with a range of COP8 software and hardware develop- ment tools.