CSPEMI400

• Three channels of EMI filtering, each with ESD protection
• Two additional channels of ESD-only protection
• ±10kV ESD protection (IEC 61000-4-2, contact discharge)
• ±25kV ESD protection (HBM)
• Greater than 30dB of attenuation at 1GHz
• 10-bump, 1.960mm x 1.330mm footprint Chip Scale Package (CSP)
• Lead-free version available

CAMD&primes CSPEMI400 is an EMI filter array with ESD protection, which integrates three pi filters (C-R-C) and two additional channels of ESD protection. The CSPEMI400 has component values of 20pF-47-20pF, and 20pF-100-20pF. The parts include avalanche-type ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±10kV, exceeding the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±25kV.

The ESD diodes on pins A4 and C4 ports are designed and characterized to safely dissipate ESD strikes of ±10kV, well beyond the maximum requirement of the IEC 61000-4-2 international standard.

This device is particularly well suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package format and easy-to-use pin assignments. In particular, the CSPEMI400 is ideal for EMI filtering and protecting data lines from ESD for the SIM card slot in mobile handsets.

The CSPEMI400 is available in a space-saving, low-profile Chip Scale Package with optional lead-free finishing.