Features: • Six and eight channels of EMI filtering
• +15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge)
• +30kV ESD protection on each channel (HBM)
• Better than 30dB of attenuation at 1GHz to 3GHz
• 15-bump, 2.960mm x 1.330mm footprint Chip Scale Package (CSPEMI606)
• Chip Scale Package features extremely low lead inductance for optimum filter and ESD performance
• 20-bump, 4.000mm x 1.458mm footprint Chip Scale Package (CSPEMI608)
• Lead-free version availableApplication• LCD data lines in clamshell wireless handsets
• EMI filtering & ESD protection for high-speed I/O data ports
• Wireless handsets / cell phones
• Notebook computers
• PDAs / Handheld PCs
• EMI filtering for high-speed data linesSpecifications
- Six and eight channels of EMI filtering
- ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge)
- ±30kV ESD protection on each channel (HBM)
- Better than 30dB of attenuation at 1GHz to 3GHz
- 15-bump, 2.960mm x 1.330mm footprint Chip Scale Package (CSPEMI606)
- 20-bump, 4.000mm x 1.458mm footprint Chip Scale Package (CSPEMI608)
- Chip Scale Package features extremely low lead inductance for optimum filter and ESD performance
- RoHS compliant (lead-free) finishing
| PARAMETER |
RATING |
UNITS |
| Storage Temperature Range |
-65 to +150 |
°C |
| DC Power per Resistor |
100 |
mW |
| DC Package Power Rating |
600 |
mW |
DescriptionEOL NOTICE
Some or all of this product family has been identified as an End-of-Life product.
Products Affected:
CSPEMI608More Info
CAMD&primes CSPEMI606 and CSPEMI608 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CSPEMI60x has component values of 15pF-100-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes of ±15kV, beyond the maximum requirement of the IEC 61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV.
This device is particularly well suited for portable electronics (e.g. wireless handsets, PDAs, notebook computers) because of its small package format and easy-to-use pin assignments. In particular, the CSPEMI60x is ideal for EMI filtering and protecting data lines from ESD for the LCD display in clamshell handsets.
The CSPEMI606 and CSPEMI608 are available in space-saving, low-profile chip-scale packages with RoHS compliant lead-free finishing.
Note: Some of the devices listed here have suggested replacements available. Please see additional information at the end of this page.
CSPEMI608 Data Sheet
