DS26C32ATMX

Logic Family :
Number of Receivers : 4
Receiver Signal Type : Differential
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Packaging : Reel
Operating Supply Voltage : 5 V
Interface Type : EIA-422, EIA-423, RS-422, RS-423
Package / Case : SOIC-16 Narrow


Description

The DS26C32ATMX belongs to DS26C32A family, which is a quad differential line receiver designe to meet the RS-422, RS-423, and Federal Standards 102 and 1030 for balanced and unbalanced digital data transmision, while retaining the low power characteristics of CMO The DS26C32A has an input sensitivity of 200 mV over the common mode input voltage range of +-7V. The DS26C32 features internal pull-up and pull-down resistors which prevent output oscillation on unused channels. The DS26C32A provides an enable and disable function common to all four receivers, and features TRI-STATE outputs with 6 mA source and sink capability. This product is pin compatible with the DS26LS32A and the AM26LS32.

The features of DS26C32A can be summarized as (1)The features of DS89C420 can be summarized as (1)CMOS design for low power ; (2)+-0.2V sensitivity over input common mode voltage range ; (3)typical propagation delays: 19 ns ; (4)typical input hysteresis: 60 mV ; (5)inputs won't load line when VCC = 0V ; (6)meets the requirements of EIA standard RS-422 ; (7)TRI-STATE outputs for connection to system buses ; (8)available in surface mount ; (9)mil-std-883C compliant.

The absolute maximum ratings of DS26C32A are (1)supply voltage (VCC):7V ; (2)common mode range (VCM): +-14V ; (3)diffrerential input voltage (V DIFF): +-14V; (4)enable input voltage (V IN): 7V ; (5)storage temperature range (Tstg): -65°C to +150°C; (6)lead temperature (soldering 4 sec.): 250°C; (7)maximum power dissipation at 25°C (Note 5): ceramio Pkg2308 mW; plastic pkg1645 mW; SOIC Pkg1190 mW; ceramic Pkg2108 mW; ceramic Pkg1215 mW; (8)maximum current per output: +-25 mA ; (9)this device does not meet 2000V ESD rating.; (10)supply voltage (VCC) 4.50 to 5.50 V; (11)operating temperature range (TA): DS26C32AT: -40 +85 °C/ DS26C32AM: -55 +125°C; (12)enable input rise or fall times: 500 ns.