DS53-0001TR

The DS53-0001TR is designed as an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low profile and low cost without sacrificing Performance ,are required. Typical applications include base stations, portables and PCMCIA cards for cellular applications. Available in tape and reel. It is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability.

DS53-0001TR has six features. (1) It would have small size and low profile. (2) Industry standard SOIC8 SMT plastic package. (3) Excellent insertion loss 0.6 dB typical. (4) Superior repeatability. (5) It would have low cost. (6) CSM, AMPS, CDPD, ARDIS, RAM frequency coverage. That are all the main features.

Some absolute maximum ratings of DS53-0001TR have been concluded into several points as follow. (1) Its input power (with internal load dissipation of 0.125W maximum) would be 1 W CW. (2) Its operating temperature would be from -40°C to +85°C. (3) Its storage temperature would be from -65°C to +150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some typical electrical specifications of DS53-0001TR have been concluded into several points as follow. (1) Its insertion loss above 4.78 dB would be typ 0.6dB and max 0.7dB. (2) Its isolation would be min 15dB and typ 18dB. (3) Its VSWR would be typ 1.4:1 and max 1.6:1. (4) Its amplitude balance would be typ 0.6dB and max 0.8dB. (5) Its phase balance degrees would be typ 2 degrees and max 4 degrees. Thata re all the main electrical specifications. All specifications apply with a 50 ohm source and load impedance. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!