EM513

The EM513 has the following mechanical data including case: molded plastic, DO-41;lead: axial leads, solderable per MIL-STD-202,method 208 guaranteed;polarity: color band denotes cathode end;mounting position: any;weight: 0.012 ounce, 0.33 gram.

Features of the EM513 are:(1)the plastic package carries underwriters laboratory flammability classification 94v-0; (2)construction utilizes void-free molded plastic technique; (3)low reverse leakage; (4)low forward voltage drop; (5)high current capability; (6)high reliability; (7)high surge current capability.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).

The absolute maximum ratings of the EM513 can be summarized as:(1)maximum repetitive peak reverse voltage VRRM:1600V; (2)maximum RMS voltage Vrms: 1120V; (3)maximum DC blocking voltage Vdc: 1600 V; (4)maximum forward voltage at 1.0A DC and 25 Vf: 1.1 V.Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.