Features: 1- and 4-Mbit flash memory devices that serially configure CycloneTM FPGAsEasy-to-use four-pin interfaceLow cost, low pin count and non-volatile memoryLow current during configuration and near-zero standby mode current3.3-V operationAvailable in 8-pin small outline integrated circuit (SO...
EPCS4: Features: 1- and 4-Mbit flash memory devices that serially configure CycloneTM FPGAsEasy-to-use four-pin interfaceLow cost, low pin count and non-volatile memoryLow current during configuration and ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Symbol | Parameter | Condition | Min | Max | Unit |
| VCC | Supply voltage | With respect to ground | −0.6 | 4.0 | V |
| VIDC | input voltageWith | respect to ground | −0.6 | 4.0 | V |
| IMAX | DC VCC or GND current | 15 | mA | ||
| IOUT | DC output current per pin | −25 | 25 | mA | |
| PD | Power dissipation | 54 | mW | ||
| TSTG | Storage temperature | No bias | −65 | 150 | °C |
| TAMB | Ambient temperature | Under bias | −65 | 135 | °C |
| TJ | Junction temperature | Under bias | 135 | °C |
With SRAM-based devices EPCS4 such as Cyclone FPGAs, configuration data must be reloaded each time the system initializes, or when a new configuration is needed. Serial configuration devices are flash memory devices with a serial interface that can store configuration data for a Cyclone device and reload the data to the device upon power-up or reconfiguration. Table 1 lists the serial configuration devices.