Current Transfer Ratio
:
Maximum Input Diode Current
:
Maximum Reverse Diode Voltage
: 5 V
Minimum Operating Temperature
: - 40 C
Packaging
: Bulk
Maximum Operating Temperature
: + 85 C
Maximum Baud Rate
: 10 MBps
Maximum Power Dissipation
: 85 mW
Maximum Forward Diode Voltage
: 1.75 V
Package / Case
: PDIP-6
Features: Compact SO8 package (except FOD260L 8-pin DIP)
Very high speed 10 MBit/s
Superior CMR - 50 kV/s at 2,000V peak
Fan-out of 8 over -40°C to +85°C
Logic gate output
Strobable output (single channel devices)
Wired OR-open collector
U.L. recognized (File # E90700) (pending)
UDE approval pending
Data multiplexing
Switching power supplies
Pulse transformer replacement
Computer-peripheral interfaceApplicationGround loop elimination
LSTTL to TTL, LSTTL or 5-volt CMOS
Line receiver, data transmissionPinout
Specifications
| FOD260L |
Full Production |
RoHS Compliant |
$0.88 |
DIP-W |
8 |
BULK |
TBD |
| FOD260LS |
Full Production |
RoHS Compliant |
$0.88 |
SMDIP-W |
8 |
BULK |
TBD |
| FOD260LSD |
Full Production |
RoHS Compliant |
$0.88 |
SMDIP-W |
8 |
TAPE REEL |
TBD |
| FOD260LSDV |
Preliminary |
RoHS Compliant |
N/A |
SMDIP-W |
8 |
TAPE REEL |
TBD |
| FOD260LSV |
Preliminary |
RoHS Compliant |
N/A |
SMDIP-W |
8 |
BULK |
TBD |
| FOD260LT |
Full Production |
RoHS Compliant |
$0.89 |
DIP-W |
8 |
BULK |
TBD |
| FOD260LTV |
Preliminary |
RoHS Compliant |
N/A |
DIP-W |
8 |
BULK |
TBD |
| FOD260LV |
Preliminary |
RoHS Compliant |
N/A |
DIP-W |
8 |
BULK |
TBD |
* Fairchild 1,000 piece Budgetary Pricing
|
| ** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples |
| Parameter |
Symbol |
Value |
Units |
| Storage Temperature |
TSTG |
-40 to +125 |
°C |
| Operating Temperature |
TOPR |
-40 to +85 |
°C |
EMITTER
DC/Average Forward Input Current (each channel) |
TOPR |
50 |
mA |
Enable Input Voltage
Not to exceed VCC by more than 500 mV |
Single Channel |
VE |
VCC+ 0.5V |
V |
| Reverse Input Voltage (each channel) |
VR |
5.0 |
V |
| Power Dissipation |
Single Channel |
PI |
45 |
mA |
| Dual Channel |
|
DETECTOR
Supply Voltage |
VCC
(1 minute max) |
7.0 |
V |
| Output Current (each channel) |
IO |
50 |
mA |
| Output Voltage (each channel) |
VO |
7.0 |
V |
| Collector Output Power Dissipation |
Single Channel |
PO |
85 |
mW |
| Dual Channel |
|
DescriptionThese optocouplers of FOD260L consist of an AlGaAS LED, optically coupledto a very high speed integrated photo-detector logic gate.Single channel devices include a strobable output. This outputfeatures an open collector, thereby permitting wired OR outputs.The output of FOD260L consists of bipolar transistors in a Bi-CMOS processfor reduced power consumption. The coupled parameters areguaranteed over the temperature range of -40?C to +85?C. Amaximum input signal of 5 mA (3 mA for the FODX6XL versions)will provide a minimum output sink current of 13 mA (fanout of 8). An internal noise shield provides superior commonmode rejection of typically 50 kV/뱠at 2,000V common mode.
Parameters: | Technical/Catalog Information | FOD260L |
| Vendor | Fairchild Optoelectronics Group |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Isolation Voltage | 3750Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Open Collector |
| Data Rate | 10Mbs |
| Current - Output/Channel | 50mA |
| Packaging | Tube |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | FOD260L
FOD260L
|
FOD260L Data Sheet
