Purchase GDU 9X-XXXXX, In-stock GDU 9X-XXXXX From SeekIC.
Part Number: GDU 9X-XXXXX
Description: This application note should be used in conjunction with individual Gate Drive Unit datasheets which c...
- Table of contents:
GDU 9X-XXXXX
-
Suppliers
DataSheet
General Description
GDU 9X-XXXXX General Description
This application note should be used in conjunction with individual Gate Drive Unit datasheets which contain electrical, timing and outline information.
GDU 9X-XXXXX Features
A range of Gate Drive Units (GDU) is available to control Dynex Semiconductor Gate Turn-Off Thyristors (GTO). These units provide the recommended waveforms for reliable switching of GTOs and have the following features:-
· Input signal to the GDU (to turn the GDU ON and OFF) or output signal (that indicates the presence of GTO gate to cathode negative voltage) can be specified for either opto-couplers or fibre optics.
· An output signal that monitors the GTO gate to cathode negative voltage. This voltage is monitored at the GDU GTO gate output connections or the GTO gate sense leads if they are wired to the GDU.
· At initial switch-on a safe start up is achieved by incorporating an inhibit of GTO gate pulses until the power supplies stabilise.
· Each power supply voltage is continuously monitored, if it falls below a preset level an OFF signal is sent to the GTO and further ON pulses are inhibited until the power supply recovers.
·Adjustable inhibit of short ON pulses. This prevents the GTO switching ON from signals that may be false.
· Adjustable minimum ON pulse width. This ensures that when the GTO is turned ON it is ON for a time that fully discharges the snubber capacitor.
· Adjustable minimum OFF pulse width. This ensures that the GTO is turned OFF for longer than its' turn-off time.
· Input signal to the GDU (to turn the GDU ON and OFF) or output signal (that indicates the presence of GTO gate to cathode negative voltage) can be specified for either opto-couplers or fibre optics.
· An output signal that monitors the GTO gate to cathode negative voltage. This voltage is monitored at the GDU GTO gate output connections or the GTO gate sense leads if they are wired to the GDU.
· At initial switch-on a safe start up is achieved by incorporating an inhibit of GTO gate pulses until the power supplies stabilise.
· Each power supply voltage is continuously monitored, if it falls below a preset level an OFF signal is sent to the GTO and further ON pulses are inhibited until the power supply recovers.
·Adjustable inhibit of short ON pulses. This prevents the GTO switching ON from signals that may be false.
· Adjustable minimum ON pulse width. This ensures that when the GTO is turned ON it is ON for a time that fully discharges the snubber capacitor.
· Adjustable minimum OFF pulse width. This ensures that the GTO is turned OFF for longer than its' turn-off time.
GDU90-20301
PDF/DataSheet Download
- Datasheet: GDU90-20301
- File Size: 38139 KB
- Manufacturer: DYNEX [Dynex Semiconductor]
- Click here to Download
- ·GDU90-20302
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 38337 KB
- ·GDU90-20310
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 37934 KB
- ·GDU90-20421
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 38293 KB
- ·GDU90-20422
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 38189 KB
- ·GDU90-20721
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 38501 KB
- ·GDU90-20722
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 38759 KB
- ·GDU91-20221
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 36605 KB
- ·GDU91-20222
- DYNEX [Dynex Semiconductor]
- Gate Drive Unit
- 36718 KB
GDU 9X-XXXXX Relative Products
GDU 91-20222
This datasheetshould be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
GDU 91-20221
This datasheet should be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
GDU 90-20722
This datasheet should be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
GDU 90-20721
This datasheet should be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
GDU 90-20422
This datasheet should be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
GDU 90-20421
This datasheet should be used in conjunction with the application note AN4571, GDU9X-XXXXX Series, Gate Drive Unit.
Hotspot Suppliers Product
VNH2SP30TR-E
Price: 4.6-6 USD
full bridge motor driver, MSOP-30, + 41 V
T1144NL
Price: 0.39-1.59 USD
transformer, 1.00 & 1.00mH, 1500 Vrms
C2798G
Price: 0.5-1.5 USD
SSOP, 250 MHz, QAM IF downconverter, 6.0V, 430mW, 30-250 MHz, Low distortion, agc amplifier
MX29F002NTQC-70G
Price: 10-20 USD
2M-bit (256K x 8) CMOS flash memory, Command register architecture, 5MHz, 32-pin PLCC
MAX809REUR+T
Price: 0.039-0.315 USD
microprocessor, supervisory circuit, 3-Pin SOP-8, -0.3V to +6.0V, No External Components
ICL8068ACDD
Price: 20-30 USD
Microprocessor, ±18V, ICL8068ACDD, DIP, Intersil
AT45DB642D-CNU
Price: 1-5 USD
sequential access Flash memory, 8CASON, 66MHz, 2.7 V ~ 3.6 V, 64Mbit
MT28F400B5WG-8BET
Price: 0.77-0.8 USD
4Mb, Boot Block Flash Memory, nonvolatile, programmable, read-only memory, TSOP48, -0.5V to +5.5V
SC1112S
Price: 1.26-2.26 USD
Triple Low Dropout Regulator Controller, SOP16, ESD Rating 2 kV, Integrated charge pump
SII9030CTU
Price: 1.5-3 USD
PanelLink Transmitter, QFP80, Programmable Data Enable (DE) generator, 192KHz
SLA7062M
Price: 2.05-2.1 USD
2-Phase Unipolar Stepper Motor Driver, ZIP21, 3 A, 100 V, Cost-Effective
AXK6F00347YG
Price: 0.1-100 USD
SMD, Narrow pitch connector, 0.5mm pitch, Strong resistance, 60V AC/DC, 150V AC
