Purchase GS6333, In-stock GS6333 From SeekIC.
Part Number: GS6333
Description: The GS6333 and GS6332 are system supervisor circuits designed to monitor VCC in digital systems and provide a reset sig...
- Table of contents:
GS6333
-
Suppliers
DataSheet
General Description
GS6333 General Description
The GS6333 and GS6332 are system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required.
When the processor power supply voltage drops below the reset threshold, the reset output is driven active, in less than 40µs (TD1). Reset is maintained active for a time period (TD2), after the Vcc rises above the threshold voltage.
To prevent jitter, the reset threshold voltage has a built-in hysteresis of 0.4% of VTH.
The GS6333 has an active-low reset output, while the GS6332 has an active-high reset output. Both devices have push/pull output drives.
The reset signal is guaranteed valid, down to Vcc = 1.0V.
Low supply current of 3µA makes these devices well suited for battery powered applications. They are designed to reject fast transients from causing false resets.
Both devices are available in a space-saving SOT-23 package.
GS6333 Maximum Ratings
| Parameter | Symbol | Value | Unit |
| Supply Voltage | Vcc | 6.0 | V |
| Reset/ Reset | 0.3 to (Vcc + 0.3) | V | |
| Input Current, Vcc | 20 | mA | |
| Output Current, Reset/Reset | 20 | mA | |
| dV/dT (Vcc) | 100 | V/µS | |
| Operating Temperature Range | TA | 40 to +125 | °C |
| Storage Temperature Range | Tstg | 65 to +150 | °C |
| Power Dissipation (TA 70°C) SOT-23 (Derate 4mW/°C above 70°C) |
PD | 260 | mW |
GS6333 Features
• Tight reset voltage tolerances ± 1.8%
• Low supply current: < 3µA
• Precision monitoring of 1.8V and 2.5V powersupply voltages
• Other threshold voltage options available from 1.5V to
2.5V in approximately 100mV increments
• Three reset active time-out period options:typical 1.5mS, 30mS, 150mS
• Reset output guaranteed down to 1.0V
• Vcc transient immunity
• No external components
• Low supply current: < 3µA
• Precision monitoring of 1.8V and 2.5V powersupply voltages
• Other threshold voltage options available from 1.5V to
2.5V in approximately 100mV increments
• Three reset active time-out period options:typical 1.5mS, 30mS, 150mS
• Reset output guaranteed down to 1.0V
• Vcc transient immunity
• No external components
GS6333 Typical Application
• Computers
• Critical µP/µC power monitoring
• Battery powered equipment
• Automotive electronics
• Critical µP/µC power monitoring
• Battery powered equipment
• Automotive electronics
GS6333 Connection Diagram
GS6333
PDF/DataSheet Download
- Datasheet: GS6333
- File Size: 55706 KB
- Manufacturer: VISAY [Vishay Siliconix]
- Click here to Download
- ·GS6332
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR15D1
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR15D2
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR15D3
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR16D1
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR16D2
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR16D3
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
- ·GS6332UR18D1
- VISAY [Vishay Siliconix]
- 3 Pin, Low-Power, P Reset Circuits
- 55706 KB
GS6333 Relative Products
GS6332
The GS6333 and GS6332 are system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required.When the processor power supply voltage of GS6333 and GS6332d...
GS6.90F300QP
TACT SWITCH SEALED STD 6.90 ACTU
GS6.90F130QP
SWITCH TACT MOM RT ANG SEALED
GS5T48-5
The GS5T48-5 is a 5WDC-DC converter designed to providea 5V/1Aisolated power source in ametal package.The GS5T48-5 featuresa wide input voltage range (40 to 60V), low reflected input current and continuous short-circuit protection.
GS5T48-15
The GS5T48-15 is a 5W DC-DC converter designed to provide a 15V/330mA isolated power source.The GS5T48-15 featuresa wide input voltage range (38 to 60V), low reflected input current and continuous short-circuit protection. GS5T48-15 is certified by UL, CSA (...
GS5T48-12
The GS5T48-12 is a 5W DC-DC converter designed to provide a 12V/420mA isolated power source.The GS5T48-12 features awide input voltagerange (38 to 60V), low reflected input current and continuous short-circuit protection. GS5T48-12 is certified by UL, CSA (l...
Hotspot Suppliers Product
FM28V020-SGTR
Price: 6.5-8.5 USD
256Kbit, Bytewide F-RAM Memory, SOIC
Q1900C-1N
Price: 15-28 USD
viterbi / trellis decoder, 84-pin PLCC , -0.3V to +7V, QUALCOMM Incorporated
EPM910ILC-15
Price: 10-11 USD
Programmable Logic Device Family PLCC44 EPM910ILC-15 Altera
1GM1-4202
Price: 100-200 USD
new parts, SMD, 1GM1-4202
CX82100-11
Price: 5-8 USD
CX82100-11 - Home Network Processor (HNP) - Conexant Systems, Inc
PJSOT15C
Price: 0.0715-0.0794 USD
Transient Protector, SOT-23, 5V to 36V, 500W, PJSOT15C, Pan Jit
5962-9163901MEA
Price: 3-8 USD
-0.5V to 7.0V Supply Voltage, 16CDIP, ±20 mA Clamp Diode Current, TTL input compatible
LUWW5AM-KYKZ-4C8E
Price: 1.18-1.639 USD
LUWW5AM-KYKZ-4C8E OOS OSRAM SMD
AD202JY
Price: 30-35 USD
2KHZ, 10-SIP, two-port, transformer-coupled isolation amplifier
MG50H2YS1
Price: 15-20 USD
silicon N channel IGBT, high input impedance, low saturation voltage, 5.0V
TMS320DM642AZNZ6
Price: 8-20 USD
DSP, BGA, -0.3V to 4V, High-Performance Digital Media Processor, SDRAM
LTM10C348F
Price: 10-25 USD
TFT-LCD module, -0.3 to 4.0 V, LVDS interface system, 100 kHz, 26cm
