Purchase H8S/2144B, In-stock H8S/2144B From SeekIC.


Part Number: H8S/2144B
Description: The following registers are related to the operating mode. For details on the bus control register (BC...


Description: The following registers are related to the operating mode. For details on the bus control register (BC...
The following registers are related to the operating mode. For details on the bus control register (BCR), refer to section 6.3.1, Bus Control Register (BCR).
• Mode control register (MDCR)
• System control register (SYSCR)
• Serial timer control register (STCR)
| Item | Symbol | Value | Unit |
| Power supply voltage | VCC | 0.3 to +7.3 | V |
| I/O buffer power supply voltage (port A) | VCCB | 0.3 to +7.0 | V |
| Power supply (VCL input)* | VCL | 0.3 to +4.3 | V |
| Input voltage (other than ports 6, 7, and A) | Vin | 0.3 to VCC + 0.3 | V |
| Input voltage (CIN input not selected for port 6) | Vin | 0.3 to VCC + 0.3 | V |
| Input voltage (CIN input not selected for port A) | Vin | 0.3 to VCCB +0.3 | V |
| Input voltage (CIN input selected for port 6) | Vin | 0.3 V to lower of voltages VCC + 0.3 and AVCC + 0.3 |
V |
| Input voltage (CIN input selected for port A) | Vin | 0.3 V to lower of voltages VCCB + 0.3 and AVCC + 0.3 |
V |
| Input voltage (port 7) | Vin | 0.3 to AVCC + 0.3 | V |
| Reference supply voltage | AVref | 0.3 to AVCC + 0.3 | V |
| Analog power supply voltage | AVCC | 0.3 to +7.0 | V |
| Analog input voltage | VAN | 0.3 to AVCC + 0.3 | V |
| Operating temperature |
Topr | General specifications: 20 to +75 |
|
| Wide temperature range specifications: 40 to +85 | |||
| Operating temperature (flash memory programming/erasing) |
Topr | General specifications: 20 to +75 |
|
| Wide temperature range specifications: 40 to +85 | |||
| Storage temperature | Tstg | 55 to +125 |
Caution: Operating this LSI in excess of the absolute maximum ratings may result in permanent damage.
Do not apply a voltage exceeding 7.0 V to input pins for the 5-V/4-V operation products.
Note: * Power supply pin for the internal power supply. Do not apply a power to the VCL pin for the 5-V/4-V operation products. Connect a capacitor for regulating the internal power voltage between the VCL and GND pins.
H8S/2140BF-ZTAT
PDF/DataSheet Download








