HCPL-053L

Maximum Reverse Diode Voltage : 5 V
Packaging : Tube
Package / Case : SOIC-8
Maximum Forward Diode Voltage : 1.7 V
Maximum Power Dissipation : 100 mW
Maximum Input Diode Current : 50 mA
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : 0 C
Maximum Baud Rate : 1 Mbps
Current Transfer Ratio : 24 %


Description

These HCPL-053L diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

These HCPL-053L optocouplers are available in an 8-pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8-pin DIP part number and the electrically equivalent SO-8 part number.

The SO-8 does not require ""through holes"" in a PCB. This package of HCPL-053L occupies approximately one-third the footprint area of the standard dual-in-line package. The lead profile is desigened to be compatible with standard surface mount processes.

These HCPL-053L optocouplers can be used in LVTTL/LVCMOS or wide bandwidth analog applications.The common mode transient immunity of 15000 V/ms minimum at VCM = 1500 V guaranteed for these optocouplers.

Parameters:

Technical/Catalog Information	HCPL-053L
Vendor	Avago Technologies US Inc.
Category	Isolators
Isolation Voltage	3750Vrms
Input Type	DC
Output Type	Transistor with Vcc
Current - Output/Channel	8mA
Voltage - Output	7V
Vce Saturation (Max)	-
Current Transfer Ratio (Min)	15% @ 16mA
Mounting Type	Surface Mount
Package / Case	8-SOIC
Packaging	Tube
Number of Circuits	2 - Dual
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 053L HCPL053L 516 1048 5 ND 51610485ND 516-1048-5