HCPL-0611

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Packaging : Tube
Package / Case : SOIC-8
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 85 mW
Maximum Forward Diode Voltage : 1.75 V


Features:

• 5 kV/ms Minimum Common Mode Rejection (CMR) at VCM = 50 V for HCPL-X601/ X631, HCNW2601 and 10 kV/ms Minimum CMR at VCM = 1000 V for HCPLX611/ X661, HCNW2611
• High Speed: 10 MBd Typical
• LSTTL/TTL Compatible
• Low Input Current Capability: 5 mA
• Guaranteed ac and dc Performance over Temperature: -40°C to +85°C
• Available in 8-Pin DIP, SOIC-8, Widebody Packages
• Strobable Output (Single Channel Products Only)
• Safety Approval UL Recognized - 2500 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577 CSA Approved VDE 0884 Approved with VIORM = 630 V peak for HCPL-2611 Option 060 and VIORM = 1414 V peak for HCNW137/26X1 BSI Certified (HCNW137/26X1 Only)
• MIL-STD-1772 Version Available (HCPL-56XX/ 66XX)

Application

• Isolated Line Receiver
• Computer-Peripheral Interfaces
• Microprocessor System Interfaces
• Digital Isolation for A/D, D/A Conversion
• Switching Power Supply
• Instrument Input/Output Isolation
• Ground Loop Elimination
• Pulse Transformer Replacement
• Power Transistor Isolation in Motor Drives
• Isolation of High Speed Logic Systems




Pinout






Specifications






Description

The HCPL-0611 is a optically coupled gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the HCPL-0611 detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 10,000 V/ms.

This unique design of HCPL-0611 provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing troublefree system performance.

HCPL-0611 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.

Parameters:

Technical/Catalog Information	HCPL-0611
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	8-SOIC (3.9mm Width)
Isolation Voltage	3750Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	-
Current - Output/Channel	50mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 0611 HCPL0611 516 1080 5 ND 51610805ND 516-1080-5