HCPL-0710

Maximum Forward Diode Voltage :
Maximum Reverse Diode Voltage :
Maximum Input Diode Current :
Current Transfer Ratio :
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Packaging : Tube
Package / Case : SOIC-8
Maximum Power Dissipation : 150 mW
Maximum Baud Rate : 12.5 MBps


Features:

• +5 V CMOS compatibility
• 8 ns maximum pulse width distortion
• 20 ns maximum prop. delay skew
• High speed: 12 Mbd
• 40 ns maximum prop. delay
• 10 kV/s minimum common mode rejection
• -40 to 100 temperature range
• Safety and regulatory approvals UL Recognized 3750 V rms for 1 min. per UL 1577 CSA Component Acceptance Notice #5 IEC/EN/DIN EN 60747-5-2
V_IORM = 630 Vpeak for HCPL-7710 Option 060
V_IORM = 560 Vpeak for HCPL-0710 Option 060




Application

• Digital fieldbus isolation:DeviceNet, SDS, Profibus
• AC plasma display panel level shifting
• Multiplexed data transmission
• Computer peripheral interface
• Microprocessor system interface




Pinout






Specifications

Parameter	Symbol	Min.	Max.	Units
Storage Temperature	TS	-55	125
Ambient Operating Temperature	TA	-40	+100
Supply Voltages	VDD1,VDD2	0	6.0	Volts
Input Voltage	VI	-0.5	VDD1 +0.5	Volts
Output Voltage	VO	-0.5	VDD2 +0.5	Volts
Input Current	II	-10	+10	mA
Average Output Current	IO		10	mA
Lead Solder Temperature	260 for 10 sec., 1.6 mm below seating plane
Solder Reflow Temperature Profile	See Solder Reflow Temperature Profile Section

Description

Available in either an 8-pin DIP or SO-8 package style respectively,the HCPL-7710 or HCPL-0710 optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The HCPL-x710 require only two bypass capacitors for complete CMOS compatibility.

Basic building blocks of the  HCPL-7710 or HCPL-0710  are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high-speed transimpedance amplifier, and a voltage comparator with an output driver.

Parameters:

Technical/Catalog Information	HCPL-0710
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Surface Mount
Package / Case	8-SOIC (3.9mm Width)
Isolation Voltage	3750Vrms
Configuration	1, One Direction
Input Type	Logic
Output Type	Push-Pull, Totem-Pole
Data Rate	12Mbs
Current - Output/Channel	10mA
Packaging	Tube
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	HCPL 0710 HCPL0710 516 1116 5 ND 51611165ND 516-1116-5