Current Transfer Ratio
:
Maximum Input Diode Current
:
Maximum Reverse Diode Voltage
: 5 V
Minimum Operating Temperature
: - 40 C
Packaging
: Tube
Maximum Baud Rate
: 15 MBps
Maximum Operating Temperature
: + 85 C
Maximum Power Dissipation
: 85 mW
Maximum Forward Diode Voltage
: 1.75 V
Package / Case
: PDIP-8
Features: • Low power consumption
• 15 kV/s minimum Common Mode Rejection (CMR) at VCM = 50 V
• High speed: 15 MBd typical
• LVTTL/LVCMOS compatible
• Low input current capability: 5 mA
• Guaranteed AC and DC performance over temperature: 40 to +85
• Available in 8-pin DIP, SOIC-8
• Strobable output (single channel products only)
• Safety approvals; UL, CSA, VDE (pending)
Application• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement
• Field buses
Specifications
|
Parameter |
Symbol |
Package** |
Min. |
Max. |
Units |
Note |
| Storage Temperature |
TS |
|
55 |
125 |
|
|
| Operating Temperature† |
TA |
|
40 |
85 |
|
|
| Average Forward Input Current |
IF |
Single 8-Pin DIP
Single SO-8 |
|
20 |
mA |
2 |
Dual 8-Pin DIP
Dual SO-8 |
15 |
1, 3 |
| Reverse Input Voltage |
VR |
8-Pin DIP, SO-8 |
|
5 |
V |
1 |
|
3 |
| Input Power Dissipation |
PI |
|
|
40 |
mW |
|
| Supply Voltage (1 Minute Maximum) |
VCC |
|
|
7 |
V |
|
Enable Input Voltage (Not to Exceed
VCC by more than 500 mV) |
VE |
Single 8-Pin DIP
Single SO-8 |
|
VCC + 0.5 |
V |
|
| Enable Input Current |
IE |
5 |
mA |
| Output Collector Current |
IO |
|
|
50 |
mA |
1 |
| Output Collector Voltage |
VO |
|
|
7 |
V |
1 |
| Output Collector Power Dissipation |
PO |
Single 8-Pin DIP
Single SO-8 |
|
85 |
mW |
|
Dual 8-Pin DIP
Dual SO-8 |
60 |
1, 4 |
Lead Solder Temperature
(Through Hole Parts Only) |
TLS |
8-Pin DIP |
260 for 10 sec., 1.6 mm below seating plane |
|
|
260 for 10 sec., up to seating plane |
Solder Reflow Temperature Profile
(Surface Mount Parts Only) |
|
SO-8 |
See Package Outline Drawings
section |
|
**Ratings apply to all devices except otherwise noted in the Package column.
DescriptionThe HCPL-260L/060L/263L/063L are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed.
The output of the HCPL-260L/060L/263L/063L detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/s.
This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compatibility.
The HCPL-260L/060L/263L/063L optocoupler AC and DC operational parameters are guaranteed from 40 to +85 allowing trouble-free system performance.
Parameters: | Technical/Catalog Information | HCPL-260L |
| Vendor | Avago Technologies US Inc. |
| Category | Isolators |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP |
| Isolation Voltage | 3750Vrms |
| Configuration | 1, One Direction |
| Input Type | DC |
| Output Type | Open Collector |
| Data Rate | 15Mbs |
| Current - Output/Channel | 50mA |
| Packaging | Tube |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | HCPL 260L
HCPL260L
516 1101 5 ND
51611015ND
516-1101-5
|
HCPL-260L Data Sheet
