HCPL-5150

Isolation Voltage :
Maximum Continuous Output Current :
Packaging : Tube
Maximum Operating Temperature : + 125 C
Maximum Propagation Delay Time : 500 ns
Maximum Forward Diode Voltage : 1.8 V
Maximum Reverse Diode Voltage : 5 V
Output Type : Open Collector
Maximum Power Dissipation : 295 mW
Package / Case : DIP-8
Minimum Operating Temperature : - 55 C
Maximum Forward Diode Current : 18 mA


Features:

• Performance Guaranteed over Full Military Temperature Range: -55 to +125

• Manufactured and Tested on a MILPRF-38534 Certified Line
• Hermetically Sealed Packages
• Dual Marked with Device Part Number and DSCC Drawing Number
• QML-38534
• HCPL-3150 Function Compatibility
• 0.5 A Minimum Peak Output Current
• 10 kV/s Minimum Common Mode Rejection (CMR) at V_CM = 1000 V
• 1.0 V Maximum Low Level Output Voltage (V_OL) Eliminates Need for Negative Gate Drive
• I_CC= 5 mA Maximum Supply Current
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Wide Operating V_CCRange: 15 to 30 Volts
• 500 ns Maximum Propagation Delay
• +/- 0.35 s Maximum Delay Between Devices

Application

• Industrial and Military Environments
• High Reliability Systems
• Harsh Industrial Environments
• Transportation, Medical, and Life Critical Systems
• Isolated IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
• Switch Mode Power Supplies (SMPS)
• Uninterruptible Power Supplies (UPS)

Specifications

Parameter	Symbol	Min.	Max.	Units	Note
Storage Temperature	TS	-65	+150	C °
Operating Temperature	TA	-55	+125	C °
Case Temperature	TC		+145	C °
Junction Temperature	TJ		+150	C °
Lead Solder Temperature			260 for 10s	C °
Average Input Current	I F AVG		25	mA	1
Peak Transient Input Current (<1 s pulse width, 300 pps)	I F PK		1.0	A
Reverse Input Voltage	VR		5	V
"High" Peak Output Current	IOH (PEAK)		0.6	A	2
"Low" Peak Output Current	IOL (PEAK)		0.6	A	2
Supply Voltage	(V CC-VEE )	0	35	V
Output Voltage	V O (PEAK)	0	VCC	V
Input Power Dissipation	PE		4	mW	1
Output Power Dissipation	PO		250	mW	3
Total Power Dissipation	PT		295	mW	4

Description

The HCPL-5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makesHCPL-5150 ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, the HCPL- 5150 can be used to drive a discrete power stage, which drives the IGBT gate.
The HCPL-5150 is capable of operation and storage over the full military temperature range and can be purchased as either commercial product, with full
MIL- PRF- 38534 Class H testing, or from Defense Supply Center Columbus (DSCC) Standard Microcircuit Drawing (SMD) 5962- 04205. All HCPL-5150 devices are manufactured and tested on aMIL-PRF- 38534 certified line and are included in the DSCC Qualified Manufacturers List, QML- 38534 for Hybrid Microcircuits.




Parameters:

Technical/Catalog Information	HCPL-5150
Vendor	Avago Technologies US Inc.
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Isolation Voltage	1000Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Push-Pull, Totem-Pole
Data Rate	-
Current - Output/Channel	500mA
Packaging	Tube
Lead Free Status	Lead Free Compliant by Exemption
RoHS Status	RoHS Compliant by Exemption
Other Names	HCPL 5150 HCPL5150