HCS473 General Description
HCS473 Maximum Ratings
Ambient temperature under bias...................................... -40 to +125
Storage temperature ....................................................... -65 to +150
Voltage on VDD w/respect to VSS ....................................... -0.3V to +7.5V
Voltage on LED w/respect to VSS .........................................-0.3V to +11V
Voltage on all other pins w/respect to VSS ...................-0.3V to VDD+0.3V
Total power dissipation(1) ...........................................................500 mW
Maximum current out of VSS pin ....................................................100 mA
Maximum current into VDD pin .......................................................100 mA
Input clamp current, IIK (VI < 0 or VI > VDD) ................................±20 mA
Output clamp current, IOK (Vo < 0 or Vo >VDD).............................±20 mA
Maximum output current sunk by any Output pin.............................25 mA
Maximum output current sourced by any Output pin ........................25 mA
Note 1: Power dissipation is calculated as follows: PDIS=VDD x {IDD - Â IOH} + Â {(VDD-VOH) x IOH} + Â(VOl x IOL).
HCS473 Features
Encoder Security
• Read protected 64-bit encoder key
• 69-bit transmission length
• 60-bit, read protected seed for secure learning
• Programmable 32-bit serial number
• Non-volatile 16/20-bit synchronization counter
Encoder Operation
• 2.05V to 5.5V operation
• Four switch inputs up to 15 functions codes
• PWM or Manchester modulation
• Selectable Baud Rate (416 - 5,000 bps)
• Transmissions include button queuing information
• PLL interface
Transponder Security
• 2 read protected 64-bit Challenge/Response keys
• Two IFF encryption algorithms
• 16/32-bit Challenge/Response
• Separate Vehicle ID and Token ID
• 2 vehicles supported
• CRC on all communication
Transponder Operation
• Three sensitive transponder inputs
• Bi-directional transponder communication
• Transponder in/RF out operation
• Anticollision of multiple transponders
• Intelligent damping for high Q-factor LC-circuits
• Low battery operation
• Passive proximity activation
• 64-bit secure user EEPROM
• Fast reaction time
Peripherals
• Low Voltage Detector
• On-board RC oscillator with ±10% variation
HCS473 Typical Application
• Passive entry systems
• Automotive remote entry systems
• Automotive alarm systems
• Automotive immobilizers
• Gate and garage openers
• Electronic door locks (Home/Office/Hotel)
• Burglar alarm systems
• Proximity access control
• Passive proximity authentication
HCS473 Connection Diagram
Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All