HD404829R General Description
HD404829R Maximum Ratings
Supply voltage VCC ..............................................0.3 to +7.0 V
Programming voltage VPP ..................................0.3 to +14.0 V
Pin voltage VT ..............................................0.3 to VCC + 0.3 V
Total permissible input current åIo ..................................100 mA
Total permissible output current åIo ...............................50 mA
Maximum input current Io................................................... 4 mA .
...........................................30 mA 4, 6
Maximum output current Io ................................................4 mA
Operating temperature Topr ..................................20 to +75 °C
Storage temperature Tstg.................................... 55 to +125 °C
Notes: Permanent damage may occur if these absolute maximum ratings are exceeded. Normal
operation must be under the conditions stated in the electrical characteristics tables. If these
conditions are exceeded, the LSI may malfunction or its reliability may be affected.
1. Applies to D11 (VPP) of the HD4074829.
2. The total permissible input current is the total of input currents simultaneously flowing in from all
the I/O pins to ground.
3. The total permissible output current is the total of output currents simultaneously flowing out from
VCC to all I/O pins.
4. The maximum input current is the maximum current flowing from each I/O pin to ground.
5. Applies to R0R7.
6. Applies to D0D9.
7. The maximum output current is the maximum current flowing out from VCC to each I/O pin.
8. Applies to D0D9 and R0R7.
HD404829R Features
· 1,876-digit ´ 4-bit RAM
· 44 I/O pins, including 10 high-current pins (15 mA, max.) and 20 pins multiplexed with LCD segment pins
· Four timer/counters
· 8-bit input capture circuit
· Three timer outputs (including two PWM out-puts)
· Two event counter inputs (including one double-edge function)
· Clock-synchronous 8-bit serial interface
· A/D converter (4 channels ´ 8 bits)
· LCD controller/driver (52 segments ´ 4 commons)
· Built-in oscillators
-- Main clock: 4.2-MHz ceramic (an external clock is also possible)
-- Subclock: 32.768-kHz crystal
· Eleven interrupt sources
-- Five by external sources, including three double-edge functions
-- Six by internal sources
· Subroutine stack up to 16 levels, including interrupts
· Four low-power dissipation modes
-- Subactive mode
-- Standby mode
-- Watch mode
-- Stop mode
· One external input for transition from stop mode to active mode
· Instruction cycle time (min.): 0.95 ms (fOSC = 4.2 MHz)
· Operation voltage
VCC = 2.7 V to 6.0 V (HD404829R)
VCC = 2.7 V to 5.5 V (HD4074829)
· Two operating modes
-- MCU mode
-- MCU/PROM mode (HD4074829 only)
HD404829R Connection Diagram
Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All