HDC135

Features:

·High speed
·TTL compatible
·High common mode transient immunity
·Wide bandwidth
·Open collector output


Specifications

Storage Tem perature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +150
Operating Tem perature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +125
Lead Sol dering Tem perature [1/16 inch (1.6 mm) from case for 10 sec onds) . . .   260
Av er age In put Cur rent - IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .  . 25 mA(1)
Peak Out put Cur rent - IF (50% duty cy cle, 1 ms pulse width) . . . . . . . . . . .  . .50 mA(2)
Peak Tran sient In put Cur rent - I_F ( 1 ms pulse width, 300 pps) . . . . . . . . . . . .  .1.0 A
Re verse In put Volt age - V_R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Input Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 mW(3)
Av er age Out put Cur rent - I_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 mA
Peak Out put Cur rent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 16.0 mA
Emitter-Base Re verse Volt age . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..  5.0 V
Sup ply and Out put Volt age - V_CC, V_O . . . . . . . . . . . . . . . . . . . . . . . . . .... 0.5 V to 15 V
Base Cur rent - I_B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 5.0 mA
Out put Power Dis sipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(4)


Description

Optek's HDC135 and HDC136 are high speed optocouplers, consisting of IR emitters and integrated photodetectors in hermetic side brazed dual-in-line 8 pin packages. Electrical characteristics of HDC135 are similar to the 6N135 and 6N136 optocouplers but with full military temperature range operation.

The HDC135B and HDC136B are high reliability optocouplers with 100% processing and Group Testing patterned after MIL-STD-883 Method 5004 and 5005 for class B.Typical screening and lot acceptance tests are provided on page 13-4.Minimum orders will apply to processed devices.