Purchase HLMP-C117, In-stock HLMP-C117 From SeekIC.


Part Number: HLMP-C117
Description: These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A...


Description: These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A...
These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A slight tint is added to the lens for easy color identification.
This lamp has been designed with a20 mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.
| Parameter | DH AS AlGaAs Red |
High Efficiency Red and Orange |
Yellow | High Performance Green and Emerald Green |
Units |
| DC Forward Current[1] | 30 | 30 | 20 | 30 | mA |
| Transient Forward Current[2] (10 sec Pulse) |
500 | 500 | 500 | 500 | mA |
| Reverse Voltage (Ir = 100 A) | 5 | 5 | 5 | 5 | V |
| LED Junction Temperature | 110 | 110 | 110 | 110 | |
| Operating Temperature Range | 20 to +100 | 55 to +100 | 20 to +100 | ||
| Storage Temperature Range | 55 to +100 | ||||
| Wave Soldering Temperature [1.59 mm (0.063 in.) from body] |
250 for 3 seconds | ||||
| Lead Solder Dipping Temperature [1.59 mm (0.063 in.) from body] |
260 for 5 seconds | ||||
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
HLMP-C117-L0000
PDF/DataSheet Download








