Features: Noise Figure: 0.7 dBOutput IP3: +36 dBmGain: 15 dBExternally Adjustable Supply CurrentSingle Positive Supply: +5.0V50 Ohm Matched Input/OutputApplicationThe HMC376LP3 / HMC376LP3E is ideal for:• Cellular/3G Infrastructure• Base Stations & Repeaters• CDMA, W-CDMA, &a...
HMC376LP3: Features: Noise Figure: 0.7 dBOutput IP3: +36 dBmGain: 15 dBExternally Adjustable Supply CurrentSingle Positive Supply: +5.0V50 Ohm Matched Input/OutputApplicationThe HMC376LP3 / HMC376LP3E is ideal...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe HMC304MS8(E) is a passive high IP3 mixer in 8 lead plastic surface mount Mini Small...
Drain Bias Voltage (Vdd) | +8.0 Vdc |
RF Input Power (RFin)(Vs = +5.0 Vdc) | +15 dBm |
Channel Temperature | 150 |
Continuous Pdiss (T = 85 ) (derate 11.83 mW/ above 85 ) |
0.769 W |
Thermal Resistance (channel to ground paddle) |
84.5 /W |
Storage Temperature | -65 to +150 |
Operating Temperature | -40 to +85 |
The HMC376LP3 & HMC376LP3E are GaAs PHEMT MMIC Low Noise Amplifi ers that are ideal for GSM & CDMA cellular basestation front-end receivers operating between 700 and 1000 MHz. The amplifi er has been optimized to provide 0.7 dB noise fi gure, 15 dB gain and +36 dBm output IP3 from a single supply of +5.0V. Input and output return losses are 14 and 12 dB respectively and the LNA requires only one external component to optimize the RF Input match.The HMC376LP3 & HMC376LP3E share the same package and pinout with the HMC382LP3 1.7 - 2.2 GHz LNA. The HMC376LP3 & HMC376LP3E feature an externally adjustable supply current which allows the designer to tailor the linearity performance of the LNA for each application.