HS-508ARH

Features:

• Electrically Screened to SMD # 5962-96742
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Environment
   - Gamma Dose () . . . . . . . . . . . . . . . . . ................1 x 10⁵RAD(Si)
   - Dielectrically Isolated Device Islands
   - SEP >110 Mev-mg/cm²Analog/Digital Overvoltage Protection
• Fail Safe with Power Loss (No Latchup)
• Break-Before-Make Switching
• DTL/TTL and CMOS Compatible
• Analog Signal Range. . . . . . . . . . . . . . . . . . . . . . . . . . . .....±15V
• Fast Access Time
• Supply Current at 1MHz Address Toggle . . . . . ...........4mA (Typ)
• Standby Power . . . . . . . . . . . . . . . . . . . . . . . .........7.5mW (Typ)

Pinout




Description

The HS-508ARH is a dielectrically isolated, radiation hardened, CMOS analog multiplexer incorporating an important feature; it withstands analog input voltages much greater than the supplies. This is essential in any system where the analog inputs originate outside the equipment. They can withstand a continuous input up to 10V greater than either supply, which eliminates the possibility of damage when
supplies are off, but input signals are present. Equally important, HS-508ARH can withstand brief input transient spikes of several hundred volts; which otherwise would require complex external protection networks. Necessarily, ON resistance is somewhat higher than similar unprotected devices, but very low leakage current combine to produce low errors. Reference Application Notes 520 and 521, available from the Semiconductor Products Division of Intersil, for further information on the HS-508ARH multiplexer in general.

The HS-508ARH has been specifically designed to meet exposure to radiation environments. Operation from -55 to 125 is guaranteed.