HT6032

` Operating voltage: 2.4V~12V
` Low power and high noise immunity CMOS technology
` Low standby current
` Capable of decoding 12 bits of information
` Pair with Holtek's 3<sup>12</sup> series of encoders
` 8~12 address pins
` 0~4 data pins
` Trinary address setting
` Received data are checked two times
` Built-in oscillator needs only 5% resistor
` VT goes high during a valid transmission
` Easy interface with an RF or an infrared transmission medium
` Minimal external components
` Package information: refer to Selection Table

· Burglar alarm system
· Smoke and fire alarm system
· Garage door controllers
· Car door controllers
· Car alarm system
· Security system
· Cordless telephones
· Other remote control systems

Supply Voltage.............................-0.3V to 13V
Storage Temperature................-50 to 125
Input Voltage..................V_SS-0.3 to V_DD+0.3V
Operating Temperature .............-20 to 75

Note: These are stress ratings only. Stresses exceeding the range specified under Absolute MaximumRatings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.

TThe 3¹² decoders HT6032 are a series of CMOS LSIs for remote control system applications. They are paired with 3¹² series of encoders. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (refer to the encoder/decoder cross reference tables).

The 3¹² series of decoders HT6032 receive serial address and data from its corresponding series of encoders that are transmitted by a carrier using an RF or an IR transmission medium. Then it compares the serial input information twice continuously with its local address. If no errors or unmatched codes are encountered, the input data codes are decoded and transferred to the output pins. The VT pin also goes high to indicate a valid transmission.

The 3¹² series of decoders HT6032 are capable of decoding 12 bits of information that consists of N bits of address and 12-N bits of data. To meet various applications they are arranged to provide a number of data pins ranging from 0 to 4 and an address pin ranging from 8 to 12. Thus, various combinations of address/data number are available in different packages.