Features: ` Operating voltage: 5V~12V` Drives two N-Channel MOSFETs` Simple single-loop control design-Voltage-mode PWM control` Fast transient response-High-bandwidth error amplifier-Full 0% to 100% duty ratio` Excellent output voltage regulation-±1% over line voltage and temperature` 5 bit digit...
HT82P604B: Features: ` Operating voltage: 5V~12V` Drives two N-Channel MOSFETs` Simple single-loop control design-Voltage-mode PWM control` Fast transient response-High-bandwidth error amplifier-Full 0% to 100...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Note: These are stress ratings only. Stresses exceeding the range specified under Absolute MaximumRatings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.
The HT82P604B provides complete control and protection for a DC-DC converter optimized for high performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology.
The HT82P604B integrates all of the control, output adjustment, monitoring and protection functions into a single package. The output voltage of the converter is easily adjusted and precisely regulated. TheHT82P604B includes a 5-input digital-to-analog converter (DAC) that adjusts the output voltage from 2.1V to 3.5V in 0.1V increments and from 1.3V to 2.05V in 0.05V steps. The precision reference and voltage-mode regulator hold the selected output voltage to within ±1% over temperature andlinevoltagevariations.
The HT82P604B provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 200kHz free-running triangle-wave oscillator that is adjustable from below 50kHz to over 1MHz. The error amplifier features a 15MHz gain-bandwidth product and 6V/ms slew rate which enables high converter bandwidth for fast transient performance. The resulting PWM duty ratio ranges from 0% to 100%.
The HT82P604B monitors the output voltage with a window comparator that tracks the DAC output and issues a Power Good signal when the output is within ±10%. It protects against over-current conditions by inhibiting PWM operation. Built-in over-voltage protection triggers an external SCR to crowbar the input supply. The HT82P604B monitors the current by using the rDS (ON) of the upper MOSFET which eliminates the need for a current sensing resistor.