HV09

The HV09 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays. The HV09 olters 32 output lines, a direction {DIR) pin to give CW or COW shift register loading, output enable and polarity (POL) control. After DATA INPUT is entered (on the tailing edge of CLOCK), a logic high will cause the outputto swing to VPP if POL is high, or to GND if POL is low.

The features of HV09 can be summarized as (1)processed with HVCMOS3 technology; (2)symmetric row drive(reduces latent imaging in AGTFEL displays); (3)output voltages up to 230V; (4)very low-power levei shifting; (5)source/sink current 200mA; (6)shift register speed 4MHz; (7)Pin-programmabie shift direction; (8)44-lead plastic & ceramic surface-mount packages.

The absolute maximum ratings of HV09 are (1)supply voltage, VDD: -0.3V to +15V; (2)supply voltage, VPP: -0.3V to +250V; (3)logic input levels: -0.3V to VDD +0.3V; (4)ground currents: 1.5A; (5)continuous total power dissipationt ceramic: 1900mW/Plastic: 1200mW; (6)lead temperature 1.6mm from case for 10 seconds:260°C; (7)storage temperature range: -65°C to 150°C.