IC SRAM 1.125MBIT 4NS 128TQFP
IDT70V3389S4PRF: IC SRAM 1.125MBIT 4NS 128TQFP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Series: | - | Manufacturer: | IDT, Integrated Device Technology Inc | ||
| Format - Memory: | RAM | Memory Type: | SRAM - Dual Port, Synchronous | ||
| Available Set Gain : | 5.9 dB | Memory Size: | 1.125M (64K x 18) | ||
| Speed: | 4ns | Interface: | Parallel | ||
| Voltage - Supply: | 3.15 V ~ 3.45 V | Operating Temperature: | 0°C ~ 70°C | ||
| Package / Case: | 128-LQFP | Supplier Device Package: | 128-TQFP (14x20) |

The IDT70V3389S4PRF is a high-speed 64K x 18 bit synchronous Dual-PortRAM. The memory array utilizes Dual-Port memory cells to allowsimultaneous access of any address from both ports. Registers on control,data, and address inputs provide minimal setup and hold times. Registers on control,data, and address inputs provide minimal setup and hold times. The features of the IDT70V3389S4PRF are: (1)True Dual-Port memory cells which allow simultaneous ccess of the same memory location; (2)High-speed clock to data access; (3)Pipelined output mode; (4)Counter enable and reset features; (5)Dual chip enables allow for depth expansion without additional logic; (6)Full synchronous operation on both ports; (7)Separate byte controls for multiplexed bus and bus matching compatibility; (8)LVTTL- compatible, single 3.3V (±150mV) power supply for core.
The following is about the absolute maximum ratings of IDT70V3389S4PRF: (1)Terminal Voltage with Respect to GND: -0.5 to +4.6 V ; (2)Temperature Under Bias: 55 to +125 ; (3)Storage Temperature: 65 to +150 ; (4)DC Output Current: 50 mA.
The electrical characteristics of the IDT70V3389S4PRF are: (1)input leakage current: 10A max at VDDQ=max, VIN=0V to VDDQ; (2)output leakage current: 10A max at CE0=VIH or CE1=VIL, VOUT=0V to VDDQ; (3)output low voltage: 0.4V max at IOL=+4mA, VDDQ=min; (4)output high voltage: 2.4V max at IOH=-4mA, VDDQ=min; (5)output low voltage: 0.4V max at IOL=+2mA, VDDQ=min; (6)output high voltage: 2.0V max at IOH=-2mA, VDDQ=min.
| Technical/Catalog Information | IDT70V3389S4PRF |
| Vendor | IDT, Integrated Device Technology Inc |
| Category | Undefined Category |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | IDT70V3389S4PRF IDT70V3389S4PRF |