IDT79RC32134

Features: `RC32300-family System Controller Direct connection between RC32364 and RC32134 Up to 75 MHz operation Drives latched address bus to memory and peripherals Direct control of optional external data buffers Programmable system watch-dog timers Big or Little endian support`Interrupt Control...

product image

IDT79RC32134 Picture
SeekIC No. : 004373293 Detail

IDT79RC32134: Features: `RC32300-family System Controller Direct connection between RC32364 and RC32134 Up to 75 MHz operation Drives latched address bus to memory and peripherals Direct control of optional exter...

floor Price/Ceiling Price

Part Number:
IDT79RC32134
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

`RC32300-family System Controller
  Direct connection between RC32364 and RC32134
  Up to 75 MHz operation
  Drives latched address bus to memory and peripherals
  Direct control of optional external data buffers
  Programmable system watch-dog timers
  Big or Little endian support
`Interrupt Control
  Provides services for internal and external sources
  Allows status of each interrupt to be read and masked
`Three general purpose 32-bit timer/counters
`Programmable IO (PIO)
  Input/Output/Interrupt source
  Individually programmable
`SDRAM/EDODRAM Controller (32-bit memory only)
  4 banks, non-interleaved, 256 MB total
  Automatic refresh generation
`UART Interface
  Two 16550 Compatible UARTs
  Baud rate support up to 1.5M
`8/16/32-bit boot PROM support
`Boundary Scan JTAG Interface (IEEE Std. 1149.1 compatible)
`Memory & Peripheral Controller
  6 banks, up to 8MB per bank
  8/16/ or 32-bit interface per bank
  Supports Flash ROM, SRAM, dual-port memory, and peripheral devices
  Intel or Motorola style IO supports external wait-state generation
`4 DMA Channels
  4 general purpose DMA, each with Endianness swappers and byte lane data alignment
  Any channel can be used for PCI
  Supports memory-to-memory, memory-to-I/O,memory-to-PCI, PCI-to-PCI, I/O-to-I/O transfers, and I/O support of
scatter/gather
  Supports chaining via linked lists of records
  Supports unaligned transfers
  Supports burst transfers
  Programmable burst size
`PCI Bridge
  32-bit PCI, up to 33 MHz
  Revision 2.1 compliant
  Target and master
  Host or satellite
  Three slot PCI arbiter, on-chip
  Serial EEPROM support, for loading configuration registers
`3.3V core operation
`3.3V I/O operation with 5V tolerant I/O
`208 pin PQFP package



Specifications

Symbol Parameter Min Max Unit
VCC Supply Voltage -0.3 4.0 V
Vi Input Voltage Gnd 5.5 V
Tstg Storage Temperature -40 125 degrees C
Ta Ambient Temperature Value 0 70 degrees C

Note: Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.


Description

The IDT79RC32134 is a high performance system controller chip that supports IDT's RISCore32300 CPU family. The RC32134 offers a direct connection to IDT's RC32364 32-bit embedded microprocessor. The RC32134 provides the system logic for boot memory, main memory, I/O, and PCI. It also includes on-chip peripherals such as DMA channels, reset circuitry, interrupts, timers, and UARTs. Together, the RC32364 CPU and the RC32134 system controller form a complete CPU subsystem for embedded designs.

Figure 1 illustrates the typical system implementation, based on the RC32364 CPU and the RC32134 system controller. The RC32134 interfaces directly to the RC32364 and provides all of the necessary control and address signals to drive the external memory and I/O. Note that, depending on the loading of the CPU data bus, external data buffers could be used to reduce the loading and isolate different memory regions. As illustrated in the system block diagram, the memory and I/O data path is external to the RC32134.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Power Supplies - Board Mount
LED Products
Isolators
Test Equipment
Boxes, Enclosures, Racks
Power Supplies - External/Internal (Off-Board)
View more