IDT821034

Features: · 4 channel CODEC with on-chip digital filters· Software Selectable A-law/m-law companding· Programmable gain setting· Automatic master clock frequency selection: 2.048MHz, 4.096 MHz or 8.192MHz· Flexible PCM interface with up to 128 programmable time slots, data rate from 512 kbits/s to...

product image

IDT821034 Picture
SeekIC No. : 004373330 Detail

IDT821034: Features: · 4 channel CODEC with on-chip digital filters· Software Selectable A-law/m-law companding· Programmable gain setting· Automatic master clock frequency selection: 2.048MHz, 4.096 MHz or 8....

floor Price/Ceiling Price

Part Number:
IDT821034
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/12/24

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· 4 channel CODEC with on-chip digital filters
· Software Selectable A-law/m-law companding
· Programmable gain setting
· Automatic master clock frequency selection: 2.048MHz, 4.096
  MHz or 8.192MHz
· Flexible PCM interface with up to 128 programmable time slots,
  data rate from 512 kbits/s to 8.192 Mbits/s
· 5 SLIC signaling pins per channel
· Flexible Serial Control Interface to microcontroller
· Software programmable timing modes
· TTL and CMOS compatible digital I/O
· Meets or exceeds ITU-T G.711 - G.714 requirements
· +5 V single power supply
· Low power consumption: 100mW Typ.
· Operating temperature range: -40 °C to +85 °C
· Packages available: 52 pin PQFP



Pinout

  Connection Diagram


Specifications

Rating
Com'I & Ind'I
Unit
Power Supply Voltage
6.5
V
Voltage on Any Pin with Respect to
Ground
-0.5 to 5.5
V
Package Power Dissipation
600
mW
Storage Temperature
-65 to +150
°C
Total SLIC Control pins output current
per device
Source from VDD :
Sink from GND:


50
50
mA

NOTE: Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational sections
of this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.



Description

The IDT821034 is a single-chip, four channel PCM CODEC with onchip filters and programmable gain setting. This device provides both m-Law and A-Law companding digital-to-analog and analog-to-digital conversions based on ITU-T G.711 - G.714 specifications. The digital filters in IDT821034 provides the necessary transmit and receive filtering
for voice telephone circuit to interface with time-division multiplexed systems. The IDT821034 has a flexible PCM interface with software selectable timing modes and independently programmable time slot for each transmit and receive channel. It also integrates the SLIC signaling functions through internal registers. The CODEC and SLIC control/status registers are accessed via the Serial Control Interface.

The IDT821034 can be used in digital telecommunication applications such as PBX, Central Office Switch, Digital Telephone and Integrated Voice/ Data Access Unit.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Soldering, Desoldering, Rework Products
Static Control, ESD, Clean Room Products
Fans, Thermal Management
Semiconductor Modules
Programmers, Development Systems
Test Equipment
View more